RUSTICA Soft Close System User manual

Soft Close System
INSTALLATION INSTRUCTIONS

SOFT CLOSE SYSTEM Recommended Tools
RUSTICAHARDWARE.com
2
3
03
2017
VERSION
SOFT CLOSE SYSTEM Parts
Drill with 1/8” Drill Bit and
Phillips Bit
Socket Wrench with
9/16” Socket
Phillips Screw Driver
A.(1)
B.(1)
C.(4) D.(2)
PARTS QTY
A. So CloseAssembly R 1
B. So Close Assembly L 1
C. Phillips Screw 4
D. Stop Tab 2

SOFT CLOSE SYSTEM Installation Instructions
RUSTICAHARDWARE.com
3
3
03
2017
VERSION
2. Remove the last two
lag screws, washers, and
hard stop from the track
(Figure 2).
Figure 1
3. Reduce the length of last two spacers by rotating
clockwise about two turns (Figure 3).
Figure 2
1. Inspect So Close Mechanisms (A
and B) to to ensure there is a le and
right assembly (Figure 1). Set aside.
Figure 3

SOFT CLOSE SYSTEM Installation Instructions
RUSTICAHARDWARE.com
4
3
03
2017
VERSION
4. Place the so close mounting
bracket and mechanism against the
back of the track with the so close
mechanism facing the wall (Figure 4).
Figure 4
Figure 5
5. Reinstall the lag screws, washers and
hard stop (Figure 5).
6. Slide the door to the closed position.
SUGGESTION:
Use double stick tape to hold the tab in
place when making adjustments and
installing.
Figure 6
8. Install the tab(D) on the door
using the two phillips head screws(C)
(provided) (Figure 6).
9. Repeat steps 2 through 8 for the
opposite side of the track.
7. Align the stop tab on the top edge of
the door to interact with the so close
mechanism (Figure 6).

SOFT CLOSE SYSTEM Installation Instructions
RUSTICAHARDWARE.com
5
3
03
2017
VERSION
10. To adjust the tension for the
so close, turn the phillips screw
on the bottom of the mechanism
using a phillips screw driver
(Figure 7).
Figure 7

WE LOVE WHAT YOU ARE
DOING WITH THE PLACE
CONGRATULATIONS ON YOUR DECISION TO BRING HOME
AN AMERICAN MADE PRODUCT OF THE HIGHEST QUALITY.
WE HOPE YOUR Soft Close System BRINGS ART AND FUNCTION
INTO YOUR LIFE.
Designed and crafted
entirely in the
U.S.A.
don’t be a stranger. follow us
on social media.
[e-mail]