(Black)
joint GND
+12V
Two red line docking
GND
+12V
ACC
①
② ③ ④⑤⑥⑦
ABC
D
(Reminder: install the machine, a remote manually adjust the system time, and will be SD card formatted.)
E
F
WIRING DIAGRAM ILLUSTRATIONS FOR THE ORIGINAL CAR REARVIEW SYSTEM
(NOTE TO CONFIRM WHETHER THE ORIGINAL CAR CAMERAS CAN SUPPORT LONG TIME ELECTRICITY)
The blue line: the ori ginal c ar
screen reversing t rigge r line
HOST
in fr ar ed
re ce iv er
video output
Rear tr igg er l ine
Left st eer in g lam p
catho de tr ig ger l in e
Rig ht stee ring la mp
cat hode tr igger l ine
BATTERY
Video interface and the camera connection line description:
A. black joint: infrared remote control receiving connection;
B. yellow joint: video output connection;
C. black joint: the front view camera connection;
D. black joint: the left optic camera connection;
E. black joint: right camera connection;
F. black joint: a rear view camera connection;
Remark:
1.The camera power not by reversing lamp power supply, changing the host +12V power
supply;
2.The screen detection line is no longer need to be controlled by the host, change to blue
line for controlling.
Power supply and trigger wiring diagram:
1.The blue line: connected to DVD display trigger line;
2.The black line: GND, wire, to connect the battery negative electrode;
3.The yellow line: BAT+, +12V, to connect the battery cathode;
4.The red line: ACC, connected ACC On port;
5.The orange line: pick the right steering lamp cathode;
6.The pink line: take a left steering lamp cathode;
7.The green line: connected with the reversing light power;
System startup display method:
1.Hang into the automobile reverse gear trigger display, delay display according to the
set time automatically shut down;
2.Remote boot display, such as the need to close down or by remote control by the
double flash off;
3.Double flash boot display, such as the need to close again press the double flash off or
remote shutdown;
4.Turn on the lights start display, delay display according to the set time automatically
shut down (menu steering model needs to be set is open).
REAR V IE W CA MERA
RIGH T VI EW C AMERA
LEFT V IE W CA MERA
FRON T VI EW C AMERA
Two red line docking
SYSTEM SETTINGS
In the remote control by pressing the "MENU" button to enter the system setup;
Setup
Video player
Date / Time
Video length
Language
Restore default settings
Other settings
Video player: play video files
Date / Time: Set the system date and time
Video length: Set the video recording length of the time.
Language settings: The needs language
Restore default settings: Set the default factory
Other settings: reverse mode, parking mode, steering
mode, delay off screen, format the
memory card, the version number
Video playback: choose video playback, press "OK" key to enter the playlist, and then
"▲" key or "▼" button to select the playback of video files. (Note: in the
process of playing a video file, press "▼" button to play the next video
files)
Date / time setting: set the same date and time into the system, enter the time settings
menu, and then the date and time are set up according to the "▼"
button and the "OK" button, set the date and time as needs, press
"OK" key to maintain the set.
Video length: setting the video length, enter into the video options menu, press the "OK"
key, then set the "▲" key and "▼" key. The video length can be set as:
1min/3min /5min. (the factory default settings for 3 minutes).
The language settings: set the desired language Chinese, simplified, traditional, English.
Restore default settings: all settings to set the default factory
Other settings: Reverse mode, Parking mode, Steering mode, Delay off screen, Format
the memory card, The version number.
Reverse mode: the display settings reversing the picture (the factory default settings for
rear + right).Select the rearview: when reversing the screen show the
rearview in a big picture; Select the rear + right: when reversing the screen
at the same time display the rear & right view;
Parking mode: off / record /G-record (default setting off).
1 Setting off, parking mode does not work;
2 Settings for record, parking mode is on, and under the parking mode, the
machine has been recording, Until the battery voltage is lower than 11.8V,
the system automatically shutdown (in order to save the vehicle start
voltage);
3 Setting G-record, parking mode is on, and under the parking mode, the
machine into standby, triggering the G-SENSOR to start recording, Until
the battery voltage is lower than 11.8V, the system automatically shutdown
(in order to save the vehicle start voltage);
Steering mode: on/ off to trigger display function (default setting: off).
1 The setting is on, after turn on lights, triggering a left / right picture display
function ;
2 The setting is off, after turn on lights, close the function trigger left / right
picture display ;
Delay shutdown the screen: sets display screen off time (3 items);
Start delay: set the auto power on ACC+ which the screen delay
off time, can be set to on / off /15 seconds
(default setting is 15 seconds).
Turning delay: set the auto turn off screen delay time, can be
set to 2 seconds /5 seconds
(default setting is 2 seconds).
