Saber Compact ATD-80395 User manual

Owner’s Manual
Cautions
Operating instructions
Made in China to ATD Tools, Inc. Speci ca ons
Visit us at www.atdtools.com
ATD-80395
Features Specifications
5-WATT COB LED STRIP LIGHT PLUS 3-WATT LED TOP LIGHT
·
·
·
·
·
·
·
·
·
·
·
·
·
· Main Bulb: 5-Wa single strip COBLED with two brightness
·
sengs: 400 lumens (high), 200 lumens (low)
· Top Bulb: 3-Wa SMD LED, 160 lumens
Automac shut off and overcharge protecon for opmal
baery life
3.7V 4000mAh lithium-ion rechargeable baery
·
·
· Length: 11.7''
· Weight: 1.05 lbs
· To use, plug the unit into any110-120V AC power source, 12V DC power source or 5V DC USB port. Let the unit fully charge unl the
4 LED’s light up on the charging indicator before use.
Press the switch once for front bulb low power, twice for top LED, three mes for front bulb high power and four mes for off.
Charge the light aer each use if it is used oen to ensure longevity. Charge light every month if it is not in constant use.
·
·
· DO NOT USE in oraround tubs, showers, sinks,pools, hot tubs, or in any wet environment.
· Use only the recommended voltage and frequency requirements.
· Keep out of reach of children.
· Do notoperate light with wet hands.
· Keep lamp away from hotobjects.
·
5-Wa COB LED with (2) brightness sengs - 400 lumens (high), 200 lumens (low)
3-Wa LED top light offers an addional flashlight funcon - 160 lumens
Automac shut-off and overcharge protecon for opmal baery life
Baery power level indicator
Light head pivots 120 degrees to direct light to work area
3.7V 4000mAh lithium-ion rechargeable baery for longer life and consistent power
Dual 360 degree rotang hanging hooks recess into base (top and boom)
Tough, impact resistant ergonomic housing with aluminum back shell for heat dissipaon
Run Time: Up to 3-hours (high), up to 5.5-hours (low)
Length: 11.7”
Versale 3-in-1 charging system
Charge from 120V AC with included wall power plug
Charge from 12V DC with included vehicle power plug
Charge from USB charging port with included USB cord
Run Time: Up to 3-hours (high), up to 5.5-hours (low)

ATD-80395
ITEM# ORDERING PART# PART DESCRIPTION ITEM# ORDERING PART# PART DESCRIPTION
1PRT80395-01 HANDLE SET ASSEMBLY 15 PRT80395-15 BOTTOM COVER
2PRT80395-02 LAMP HOLDER ASSEMBLY
16
PRT80395-16 USB COVER
3PRT80395-03 LIGHT COVER
17
PRT80395-17 MAGNET
4PRT80395-04 REFLECTOR
18
PRT80395-18 MAGNET LABEL
5PRT80395-05 LED
19
PRT80395-19 BASE HOOK
6PRT80395-06 LAMP HOLDER B
20
PRT80304-27 USB CABLE
7PRT80395-07 TOP HOOK
21
PRT80304-31 DC ADAPTER
8PRT80395-08 LENS
22
PRT80304-22 AC ADAPTER
9PRT80395-09 LED COVER
23
PRT80395-23 SCREW A
10 PRT80395-10 TOP PCB BOARD
24
PRT80395-24 SCREW B
11 PRT80395-11 LOGO
25
PRT80395-25 GEAR TOOTH
12 PRT80395-12 LI-ION BATTERY
26
PRT80395-26 BUTTON
13 PRT80395-13 PCB BOARD
27
PRT80395-27 CONNECTOR
14 PRT80395-14 COUNTER WEIGHT
28
PRT80395-28 FOAM PAD