Sachtler S2051-1062 User manual

Part No. S2051-1062
Unscrew the Lock Knob and remove from
the handle.
Use the supplied Hex key to screw the handle to
the tripod mount. Firmly tighten.
Screw the Lock Knob back onto the handle turning clockwise.
21
3
owtech Rotating Carry Handle 75 mm / 100 mm
Fitting Handle
Note! Take care to align threads properly whilst tting to avoid causing damage to parts.
Supplied Parts
New: Carry Handle
Lock Knob
Hex Key
7/32” (5.5mm)

Loosen the Lock Knob, approximately
three turns anti-clockwise.
Pull the handle away from the tripod (a). Rotate the
handle into the horizontal position (b) and release.
The handle will remain in place under spring
pressure. The tripod may now be used in the
lowest position.
To place the handle back into the carry position:
Rotate the handle back into the lock position and
tighten the Lock Knob.
a
b
12
3
Publication Part No. S2051-4985/0
To Move Carry Handle to Horizontal Position
www.sachtler.com