SACKit CHARGEit Stand User manual

CHARGEit Stand
USERMANUEL

THANK YOU!
Thank you for purchasing the CHARGEit Stand from SACKit. Please
read the enre instrucon manual before using the product and
save it for future reference. We reserve the right to change or up-
date informaon and to correct errors, inaccuracies, or omissions in
text, images, and technical data. If you have any quesons regard-
ing technical problems, please contact our customer services. We
hope you will enjoy your new CHARGEit Stand.
Let SACKit power your life!
2

BOX CONTENT
1 x CHARGEit Stand
1 x CHARGEit Stand carrying bag
1 x Quick start guide
1 x USB-C charging cable
3
QUICK START GUIDE
Use CHARGEit while in power supply
1. Plug CHARGEit Stand to a power supply with the USB-C cable (adaptor not
included)
2. You can use wireless charging by placing your unit on the X if the unit sup-
ports wireless charging
3. You can use cabled charging by plugging in the cable from your unit to the
CHARGEit Stand USB-port
4. Above menoned point 2 and 3 can also be combined when CHARGEit is
plugged into a power supply
Use CHARGEit Stand as a power bank (no power supply)
1. Charge CHARGEit Stand for 3 hours minimum for full power bank
2. Switch CHARGEit Stand on by pressing the POWER buon
3. You can use wireless charging by placing your unit on the X if unit supports
wireless charging
4. You can use cabled charging by plugging in the cable from your unit to the
USB-port
5. You can charge one unit wirelessly and one unit cabled simultaneously
6. CHARGEit Stand will switch o automacally when not in use for one
minute
7. Do not charge your device wirelessly with a steel plate or magnec back, this
may damage your devices
Correct storage and transportaon of CHARGEit
1. When you need to take CHARGEit Stand on the go please use the included
carrying bag to protect the beauful surface of the power bank
2. CHARGEit Stand needs to be carried in your hand luggage when ying

4

5
USER MANUAL
Funcons:
• USB Type-C input: Here you need to connect the included charging
cable to power CHARGEit Stand.
• USB output: Here you can connect devices to be charged via cable
• Power-On LED indicator: The green LED light will switch on for 10 sec
when the charging cable is plugged in
• Wireless Charging LED indicator: The blue LED light will switch on for
30 sec when wireless charging is acve
FIRST USE
1. Connect an adaptor to a power outlet. See page 6 for a guide to choo-
sing the correct adaptor
2. Connect the included cable (USB side) to the adaptor
3. Plug the USB-C side of the charging cable in to CHARGEit Stand

6
CHOOSE CORRECT ADAPTOR FOR CHARGEit Stand
Choosing the correct adaptor is very important for your safety and the
funcon of CHARGEit Stand. There are dierent opons for adaptors as
described below:
1. QC1.0 output 5V/2A (for example the standard Apple adaptor)
2. QC2.0 output 5V/2A, 9V/1.67A
3. QC3.0 output 5V/3A, 9V/2A, 12V/1.5A
SACKit recommends that you choose a QC2.0 or QC3.0 adaptor to
achieve the best stability and funcon of CHARGEit Stand. Using the
QC1.0 adaptor might result in an overheated CHARGEit Stand or device
and might damage the product. SACKit will not be responsible for any
issues or safety hazards arising from the use of a QC1.0 adaptor. QC2.0
and QC3.0 adaptors can be purchased on various websites.

7
TROUBLESHOOTING
If you have trouble using your CHARGEit Stand we ask you to try the
following soluons. If these soluons does not x your problem please
contact our customer service at [email protected].
CHARGEit Stand charges slowly
• Check that all cables are connected correctly
• Make sure you have chosen either a QC2.0 or QC3.0 adaptor
The blue LED indicator is blinking and the phone is not charging
• Make sure your phone is placed correctly on the X in the middle of
CHARGEit Stand
• Power ON/OFF your phone and retry
• Make sure your phone supports wireless charging
I feel CHARGEit Stand is charging my device too slowly
• CHARGEit Stand only supports Fast Charging if your device supports
the feature. Also you need to use a QC2.0 or QC3.0 adaptor. See
page 6
My device or CHARGEit Stand is very warm
• You need to ensure you have chosen the correct adaptor for
CHARGEit Stand. See page 6 for a guide
• The wireless charger must not be covered as this might result in
overheang

8
CLEANING OF THE PRODUCT
1. Kindly switch o CHARGEit Stand before you clean it and remove it
from the power supply
2. Do not use any chemicals to clean the product. If you need to clean the
power bank please use a so cloth with a mild cleaner
3. During cleaning please be aware to avoid water in the USB port.
Large amounts of water and uids may damage CHARGEit Stand
TECHNICAL SPECIFICATIONS
• Model: CHARGEit Stand - Wireless Charger and power bank
• Material: ABS + PC, Aluminium
• Input: 5V/2A 9V/1.67A
• Qi output: 5W, 7.5W, 10W
• Number of charging coils: 3
• Distance for Qi wireless pad: <8mm
• Converon: >72%
• Frequenzy: 110-205KHz
• Size: 140*80*24mm
• Weight: 380g

9
IMPORTANT SAFETY INFORMATION
Please read the following informaon and operate the charger and
accessories accordingly to ensure correct and safe use of the product.
We are not responsible for damage caused by failure to comply with the
instrucons or irresponsible use of the product.
Warning
To prevent any res or electrical hazards please act according to the fol-
lowing guidelines:
• Do not disassemble or replace any parts of this device. Please contact
professional maintenance or qualied service center if there is any
damage to the device.
• Do not expose this device to rain, water or wet places. Do not place
liquid containers on the product side.
• Do not place in or close to any liquid
• If any liquids ows inside the product, please shut down the product
and contact customer service center
• Do not place this device in or close to sources of excessive heat or re.
(Such as: candles, replaces or direct sunlight)
• Please shut down in lightning weather
• Keep this device away from any dust and vibraon.
• Do not use excessive force when using the product.
• If the product is below 5°C when you receive it, please open the
product packaging and wait for it to reach room temperature.
• To prevent overheang of the product is it necessary to keep a
cleared area of 10 cm around the product
• Be sure to place this device on stable, at and level surfaces only.
• Do not charge your device wirelessly with a steel plate or magnec
back, this may damage your devices
• To prevent overheang, please do not install the charger in enclosed
spaces. Be sure to set aside at least 10 cm around the product for
venlaon

DISPOSAL OF THE PRODUCT
CHARGEit Stand is made from recyclable and high quality materials.
Do not dispose of together with living garbage. Please understand the
local classicaon about collecng electronical, electrical products that
contains baeries. Correct disposal of the product will help to prevent
negave impact to the environment.
10

11