SAFAVIEH COUTURE Morticia SFV5740A User manual

The legs and hardware are located Inside the Coffee Table
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should undertake a
complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly
* This item may require periodic tightening
H3
Allen key 4 mm
1X
4X
Flat washer 16 mm
Allen bolt 12x6 mm
A
B
H1
H2
Cabinet
Leg
8X
8X
1X
PIECE QUANTITY
DESCRIPTION PICTURE
Item# NST9008A
Product dimensions: 32.2"L* 32.2"W*15.7"D
H4
Allen bolt 10x6 mm 4X
WARNING
Weight Capacity - 110 LBS
Warning : Do not stand on Table
Warning : Do not over torque bolts.
Item# SFV5740A
Product dimensions: 32.2"W* 32.2"D*15.7"H
WARNING
Weight Capacity - 110 LBS
Warning : Do not stand on Table
Warning : Do not over torque bolts.
NOTICE
* Please make sure that you have all parts indicated and are in good condion before you begin assembly
of this item. Refer to part list and hardware list below for guidance .
* This item should be assembled on a so surface to prevent scratching the finish during assembly.
* This item may require periodic ghtening.
* If you are having difficulty, our friendly customer care team is always here to help . Please
email [e-mail]
* Before beginning assembly of product , make sure all parts are present . Compare parts with parts
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly me : 10 minutes
* Tools Required for Assembly (included): Allen key
CARE AND MAINTENANCE
PREPARATION
contents list and hardware contents list.
Part List and Hardware List
Hw4 Allen key
1X
Flat washer 16 x 8 mm
Allen bolt 6 X 1 X 10 mm
A
Hw2
Hw3
Shelf
4X
8X
1X
PIECE DESCRIPTION PICTURE QUANTITY
BLeg 4X
Allen bolt 6 X 1 X 12 mm
Hw1 8X
*For cleaning surface of wood , dampen a cloth with diluted solvent or cleaning soluon and gently
rub over a small area at a me. Finally wipe the area with clean dampened cloth to remove any cleanser.
*Dusng and cleaning your metal furniture should be done with a so coon towel or cloth to avoid scratches.
*Do not keep hot items like coffee mugs, hot iron etc. directly on surface.
*Avoid contact of furniture surface to any organic solvents.

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
Tools Required for Assembly (included): Allen Key
PREPARATION
A
H4
H1
H2
8x
B
B
B
B
H4
H3
H2
4x
BB
B
B
A
The legs and hardware are located Inside the Coffee Table
STEP2 PLACE THE COFFE TABLE
(A) DOWN AS SHOWN.
STEP3 ALIGN THE LEGS (B) WITH
PRE ATTACHED METAL UNDER
THE COFFE TABLE (A).
STEP1 OPEN THE ZIPPER ON THE
INSIDE OF THE COFFEE TABLE AND
TAKE OUT LEGS AND HADWARE.
STEP4 INSERT ALLEN BOLT (H1)
WITH WASHER (H2) AND TIGHTEN
WITH ALLEN KEY (H3).
STEP5 FLIP THE COFFEE TABLE
UPSIDE.
PREPARATION
* Before beginning assembly of product , make sure all parts are present . Compare parts with parts
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly me : 10 minutes
* Tools Required for Assembly (included): Allen key
contents list and hardware contents list.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
Leg
STEP1
Unwrap the legs & take out legs.
Hardware
Open the hardware pouch & take out hardware.
STEP2
Place the Table upside down on a clean surface.
Align legs on both sides of Table as per side holes
present on either side of Table.
STEP3
Put the washer on the Bolt in the order shown in
picture.
STEP5
Align Allen bolt (Hw3) with the Allen key (Hw4)
order shown in the picture.
Hw2 Hw1
Hw2
Hw1
Hw4
STEP4
Insert Allen Bolt (Hw1) with Washer (Hw2) ghten
A
B
B
B
B
Hw3
Hw4
Hw3
Hw4
with Allen Key (Hw4). Don’t over ghten.
Hw2
Hw1
Hw4
Hw3
Hw4
STEP6
Insert Allen Bolt (Hw3) & ghten with Allen Key
(Hw4). Don’t over ghten.

STEP7
Repeat step 5 for, other side leg, flip the Table upright with help.