SAFAVIEH COUTURE Galen SFV1300A-K User manual

CARE AND MAINTENANCE
Spot clean using soft cloth or an unused paint brush.
Only a professional cleaner should undertake a complete overall cleaning.
NOTICE
* Place make sure that you have all parts indicated before your begin assembly of this item SFV1300A-K
* This item should be assembled on a soft surface to prevent scratching the finish during assembly DIMENSIONS: 79.76"x84.33"x46.69"
* This item may require periodic tightening WEIGHT CAPACITY: 70.74 Kg
Part List and Hardware List
DESCRIPTIONPIECE QTY
WRENCH
HEX NUT
LOCK WASHER
FLAT WASHER
THREADED ROD
1 PC
8 PCS
8 PCS
8 PCS
8 PCS
Ø 5/16" x 4"
1 1
2" SCREW 8 PCS
HEADBOARD 1 PC
FOOTBOARD 1 PC
SIDE RAILS 2 PCS
CENTER LEG SUPPORT 4 PCS
SLAT 4 PCS
PICTURE
K
J
I
H
G
E
C
B
A
F
D

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare part with package contents list and hardware contents list.
If any part is missing or damage, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Wrench
Step 3.
Insert bolted end of adjustable leveler into bottom of center support
leg and twist until tight
Step 4.
Place a slat 3” to 5” inward from each end of wood cleats.
Place two slats between two ends slats so that there is an equal amount
of space between all four slats and secure with wood screw provided.
Step 1.
Attach the side rails to the headboard.
Place the washers on the threaded rod in the order shown in the
pictures.
Step 2.
Attach the side rails to the footboard.
Place the washers on the threaded rod in the order shown in the
pictures.
A
GHIJ
E
D

CARE AND MAINTENANCE
Spot clean using soft cloth or an unused paint brush.
Only a professional cleaner should undertake a complete overall cleaning.
NOTICE
* Place make sure that you have all parts indicated before your begin assembly of this item SFV1300A-Q
* This item should be assembled on a soft surface to prevent scratching the finish during assembly DIMENSIONS: 63.86"x84.33"x46.69"
* This item may require periodic tightening WEIGHT CAPACITY: 61.26 KG
Part List and Hardware List
DESCRIPTIONPIECE QTY
WRENCH
HEX NUT
LOCK WASHER
FLAT WASHER
THREADED ROD
1 PC
8 PCS
8 PCS
8 PCS
8 PCS
Ø 5/16" x 4"
1 1
2" SCREW 8 PCS
HEADBOARD 1 PC
FOOTBOARD 1 PC
SIDE RAILS 2 PCS
CENTER LEG SUPPORT 4 PCS
SLAT 4 PCS
PICTURE
K
J
I
H
G
E
C
B
A
F
D

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare part with package contents list and hardware contents list.
If any part is missing or damage, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Wrench
Step 3.
Insert bolted end of adjustable leveler into bottom of center support
leg and twist until tight
Step 4.
Place a slat 3” to 5” inward from each end of wood cleats.
Place two slats between two ends slats so that there is an equal amount
of space between all four slats and secure with wood screw provided.
Step 1.
Attach the side rails to the headboard.
Place the washers on the threaded rod in the order shown in the
pictures.
Step 2.
Attach the side rails to the footboard.
Place the washers on the threaded rod in the order shown in the
pictures.
A
GHIJ
E
D