Safavieh Furniture Aberton COF7009 User manual

PIECE
DESCRIPTION
PICTURE
QUANTITY
A
Table top
1x
B
Leg frame
4x
HW1
Hex bolt: 6x0.5x16mm
16x
HW2
Flat washer: 6mm
16x
HW3
Allen key
1x
NOTICE
*Please makesure that you have all parts indicated and they are in good condition beforeyou beginassemblyof
thisitem.Referto partlistandhardwarelistbelowforguidance.
*Thisitemshouldbe assembledon asoftsurfaceto prevent scratching the finish during assembly.
*Thisitemmayrequire periodictightening.
*If you are havingdifficulty,ourfriendlyCustomer Careteamis always here to help.Pleaseemail
[e-mail]
PREPARATION
*Before beginning assembly of product, makesure all parts are present.Compareparts withpackagecontents list
andhardwarecontentslist.
*Ifanypartis missingor damaged, do notattemptto assembletheproduct.
*EstimatedAssemblyTime:20 minutes.
*Toolsrequired for Assembly(included): AllenKey
CARE AND MAINTENANCE
Alwaysuse feltpadsunderallarticles to preventdiscolorationor softeningof thelacquer.Plasticand rubberbases
on items can discolor wood.Wipeup spills immediatelyand avoidcommonhazards suchas hotdishes,harsh
solvents and abrasives.Cleaningshould be done withasoft lintfreecottonclothdampenedwihtwateror furniture
polish.
On highly used surfaceswe recommend applyingaqualitypastewaxwhich should be usedon aregular basis to
provide additionalprotectionfromscratchesand spills.Howoften youapplythewax depends on how much wear
the furniturereceives.
Weight Capacity : 110 LBS
Warning : Do not stand on table
Warning : Do not over torque bolts
Item # COF7009
Product Dimension: 43.3Wx23.6Dx15.7H”
Part List and Hardware List

Step 1: Carefully place the Table top(A) face
down on a clean, non-marring surface,
insert Leg frame(B) into the hole of table
tops in turn as picture.
Step 2: Keep Leg frame(B) and Table top(A) at the same
level, align the mounting positions of Leg frame(B) and
Table top(A), attach them by using Hex bolt(HW1) and Flat
washers(HW2) and Allen Key(HW3) as picture.
Step 3: Repeat Step 2. Then tighten all Hex bolt(HW1) by
Allen key(HW3) in a sequential manner.
Your table is ready for use.
PREPARATION
*Beforebeginningassembly of product,make sureallparts are present.Compare parts with package contents listand hardware contents list.
*Ifanypartis missingor damaged, do notattemptto assembletheproduct.
*EstimatedAssemblyTime:20 minutes.
*Toolsrequired for Assembly(included): AllenKey
*If you are havingdifficulty,ourfriendlyCustomerCare team is always here to help.Please [e-mail]
Hardware is located inside the box. You can find them placed near the sign ‘HARDWARE INSIDE’