Safavieh Furniture Chase AMH4127A User manual

A 1X
B 2X
C 1X
H1 4X
H2 1X
H3 2X
H4 1X
H5 1X
Spanner
Allen key
Allen bolt (short)
Cap nut
Metal bar
Allen bolt ( long)
Table top
Leg
Model# AMH4127A
Part List and Hardware List Product Dimensions: 25"W x 25""DX 24"H
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the
lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills
immediately and avoid common hazards such as hot dishes, harsh solvents and
abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with
water or furniture polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide additional protection from
scratches and spills. How often you apply the wax depends on how much wear the
furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly
* This item may require periodic tightening

Step
to tighten the cap nut (H3)
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list
and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Spanner & Allen key
Upside down the table top (A) and attach the leg (B) to the table top (A). Use the allen key (H4) to tighten the bolt (H1).
A
ttach the metal bar (C) to the leg (B) and to the table top (A). Use the allen key (H4) to tighten the bolt (H2) and use the span