Safavieh Furniture KCH 1401 User manual

Item Id : KCH 1401
Product Dimensions : 38.97” W x 17.71” D x 36.22” H
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or
softening of the lacquer. Plastic and rubber bases on items can
discolor wood. Wipe up spill immediately and avoid common hazards
such as hot dishes,harsh solvents and abrasives. Cleaning should be
done with a soft lint free cotton cloth dampened with water or furniture
polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide
additional protection from sratches and spills. How often you apply the
wax depends on how much wear the furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin
assembly this item.
* This item should be assembled on a soft surface to prevent scratching
the finish during assembly.
* This item may require periodic tightening.
* Atleast 2 person require to assemble this product.
Weight Capacity : 55 lbs
PIECE DESCRIPTION PICTURE QUANTITY
Part List and Hardware List
HW 1
HW 2
Silver Metal Knob
Truss Screw 20mm
Jcbc Bolt M6x0.5x60mm
Allen Key M4
2x
2x
1x
2x
12x
10x
12x
4x
8x
1x
A
B
C
D
E
F
Top Panel
Leg Frame L 1x
Leg Frame R 1x
Drawer Unit 1x
Handle Bar 1x
2x
4x
Shelf Panel
Apron
Jcbc Bolt M6x0.5x40mm
Barrel Nut
Wood Button
Caster Wheel
G
HW 3
HW 4
HW 5
HW 6
HW 7
HW 8
Wood Dowel M8 x 30mm
HW 9
Spanner 13 1x HW 10
NOTE :
Phillip Screw Driver (Not Provided)
Mallet (Not Provided)
WARNING : DO NOT OVER TORQUE
BOLTS/SCREWS

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package content list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time : 20 minutes.
Step 1 Step 2
1 2
Insert the wood dowel inside the hole at the apron. Put the table top upside down on the clear and smooth
surface to avoid the surface scratch. Tight the leg at the
table top then attach the apron at the leg.
8x
HW 8
HW 9
HW 2
G
G
G
G
G
G
G
A
B
G
6x
HW 3
x 5

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package content list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time : 20 minutes.
Step 3 Step 4
3 4
Insert the both shelf inside the groove at the apron. Then
tight the leg
Attach the caster wheel at the leg and insert wood button.
6x
HW 2
HW 3
F
F
C
HW 9
HW 7
HW 10
HW 6
4x
12x
5 x

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package content list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time : 20 minutes.
Step 5 Step 6
5 6
Assemble the handle bar. Attach the Silver Metal Knob, then insert drawer unit throught
the slider rail.
2x
HW 9
HW 1
E