Safavieh Furniture AMH8511 A User manual

ITEM ID: AMH8511 A/B/C/D/E
PRODUCT DIMENSION: 20" W x 17" D x 36.5" H
PIECE DESCRIPTION QUANTITY Weight Capacity: 225LBS
A BACK REST 1X
B LONG LEGS (RED STICKER) 2X
C SHORT LEGS (BLUE STICKER) 2X
Part List and Hardware List
WARNING: DO NOT STAND ON CHAIR
WARNING: DO NOT ROCK BACK AND FORTH OR
SIDE TO SIDE ON CHAIR
NOTICE
* Please make sure that you have all parts indicated and they are in good condition before you begin assembly of
this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a soft surface to prevent scratching the finish during assembly.
* This item may require periodic tightening.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email
[email protected]
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list
and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): None
CARE AND MAINTENANCE
Adhesive felt pads should always be applied to areas of furniture which make direct contact with flooring, said
application will prevent damage to the furniture and or surfaces on which the furniture lies. Objects placed on
articles of furniture should rest on non abrasive material as to prevent damage to the wood finish. Objects whose
composition consist of plastic and rubber are known to discolor and damage the wood surfaces on which they
rest. Wipe up spills immediately and avoid common hazards such as hot dishes, harsh solvents and abrasives.
Cleaning should be done with a soft lint free cotton cloth dampened with water or furniture polish. On highly
used surfaces we recommend applying a quality paste wax which should be used on a regular basis to provide
additional protection from scratches and spills. How often you apply the wax depends on how much the furniture
wears.
PICTURE

STEP3: Screw Right Leg (BLUE STICKER) into the back of the
chair marked with BLUE STICKER
STEP1: Flip Back Rest (A) upside down. Screw Right Leg (RED
STICKER) into the front of the chair marked with a RED STICKER
STEP2: Screw Left Leg (RED STICKER) into the front of the chair marked
with RED STICKER
STEP4: Screw Left Leg (BLUE STICKER
) into the back of the chair
marked with BLUE STICKER
STEP5: Before use, please make sure legs are secured tightly before
sitting.
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): None
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
A. BACK REST A. BACK REST A. BACK REST
A. BACK REST
B. Long legs
Red Sticker
B. Long legs
Red Sticker
C. Short Legs
Blue Sticker
B. Short Legs
Blue Sticker