Safavieh Furniture DCH8801 User manual

CARE AND MAINTENANCE
PIECE DESCRIPTION PICTURE QTY PIECE DESCRIPTION PICTURE QTY PIECE DESCRIPTION PICTURE QTY
A
Front leg
frame 1x HW1
Bolt
6x0.5x60mm 2x HW5
Cross nut M6 x
45mm 2x
BSeat 1x HW2
Bolt
6x0.5x40mm 6x HW6
Cross nut M6 x
13mm 2x
CBack leg frame 1x HW3
Flat washer
2mm
6x HW7
Screw 4 x 35
mm
5x
DSide stretcher 2x HW4
Split lock
washer 2mm
6x HW8 Allen key 1x
ITEM DIMENSION: 18.50"x 18.97" x 31.89"
ITEM ID: DCH8801
Part List and Hardware List
NOTICE
* Please make sure that you have all parts indicated and they are good condition before you begin assembly of
this item.Refer to part list and hardware list below for guidance.
* This item should be assembled on a soft surface to prevent scratching the finish during assembly.
* This item may require periodic tightening.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email
[e-mail]
PREPARATION
* Before beginning assembly of product, make sure all parts are present.Compare parts with part contents list
and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time : 10 minutes.
* Tools Required for Assembly (included): Allen Key
WOOD CARE: Always use felt pads under -all ar ticles to prevent discoloration or
softening of the lacquer. Plastic and rubber bases on items can discolor wood. Wipe up
spills - im mediately and avoid common hazards such as hot dishes, harsh solvents and
abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with
water should be done with a soft lint free cotton cloth dampened with water or furniture
polish. On highly used surfaces we recommend applying a quality paste wax which should
be used on a regular basis to - pro vide additional protection from scratches and spills.
How often you apply the wax depends on how much wear the furniture receives.

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
STEP 1: PUT THE WASHERS ON THE BOLT IN THE ORDER SHOWN IN THE
PICTURE
STEP 2: INSERT THE FRONT LEGS FRAME (A) AND THE FIRST SIDE STRETCHER (D) IN THE
BOLTS BUT DONˈT TIGHTEN COMPLETELY
STEP 3: INSERT THE FRONT LEGS FRAME (A) AND THE SECOND SIDE
STRETCHER (D) IN THE BOLTS BUT DONˈT TIGHTEN COMPLETELY
STEP4: INSERT THE BACK LEGS © AND THE FRONT LEG FRAME (A) IN THE BOLTS
BUT DONˈT TIGHTEN COMPLETELY

STEP 7: PUT THE CHAIR UPRIGHT AND MAKE SURE ALL LEGS ARE LEVEL, THEN FIRMLY TIGHTEN BOLTS WITH ALLEN KEY WHILE THE CHAIR IS UPRIGHT AS PICTURED
ABOVE
STEP 5: INSERT THE BACK LEGS (C) IN THE BOLTS BUT DONˈT TIGHTEN
COMPLETELY
STEP 6: INSERT THE SEAT (B) AND CHAIR FRAME IN THE SCREWS BUT DONˈT TIGHTEN
COMPLETELY