Safavieh Furniture Endora AMH5707 User manual

Item# AMH5707
Product Dimensions:17.75" W x 17.75" D x 20" H
PIECE QUANTITY
A 1X
B 4X
C 1X
H1 4X
H2 4X
H3 1X
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly
* This item may require periodic tightening
Bottom Board
Leg
Allen key
Washer
CARE AND MAINTENANCE
A
lways use felt pads under all articles to prevent discoloration or softening of the lacquer.
Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and
avoid common hazards such as hot dishes,harsh solvents and abrasives. Cleaning should
be done with a soft lint free cotton cloth dampened with water or furniture polish. On highly
used surfaces we recommend applying a quality paste wax which should be used on a
regular basis to provide additional protection from sratches and spills. How often you apply
the wax depends on how much wear the furniture receives.
NOTICE
Part List and Hardware List
DESCRIPTION PICTURE
Allen bolt
Table Top

Step 1 Step 2 Step 3
Take all packaging off the side table.Screw one Screw the other three legs to the table top and Put the bottom board over the end of four legs, make
leg to the table top and gently tighten the leg. gently tighten the legs. sure the holes on board are lined with the holes on legs,
slightly screw the four legs by using 4 Allen bolts.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
2
13