Safavieh Furniture Edgefield ACC7004 User manual

PIECE
DESCRIPTION
PICTURE
QUANTITY
A
Table top
1x
B
Crossbeam
2x
C
Crossbeam
2x
D
Leg frame
2x
HW1
Hex bolt: 6x0.5x10mm
16x
HW2
Hex bolt: 6x0.5x30mm
4x
HW3
Flat washer: 6mm
20x
HW4
Allen key
1x
NOTICE
*Please makesure that you have all parts indicated and they are in good condition beforeyou beginassemblyof
thisitem.Referto partlistandhardwarelistbelowforguidance.
*Thisitemshouldbe assembledon asoftsurfaceto prevent scratching the finish during assembly.
*Thisitemmayrequire periodictightening.
*If you are havingdifficulty,ourfriendlyCustomer Careteamis always here to help.Pleaseemail
[e-mail]
PREPARATION
*Before beginning assembly of product, make sure all parts arepresent. Comparepartswithpackagecontents list
andhardwarecontentslist.
*Ifanypartis missingor damaged, do notattemptto assembletheproduct.
*EstimatedAssemblyTime:20 minutes.
*Toolsrequired forAssembly(included):Allen Key
CARE AND MAINTENANCE
Alwaysuse feltpadsunderallarticles to preventdiscolorationor softeningof thelacquer.Plasticand rubberbases
on items can discolor wood.Wipeup spills immediatelyand avoidcommonhazards suchas hotdishes,harsh
solvents and abrasives.Cleaningshould be done withasoft lintfreecottonclothdampenedwihtwateror furniture
polish.
On highly used surfaceswe recommend applyingaqualitypastewaxwhich should be usedon aregular basis to
provide additionalprotectionfromscratchesand spills.Howoften youapplythewax depends on how much wear
the furniturereceives.
Part List and Hardware List
Weight Capacity : 88 LBS
Warning : Do not stand on table
Warning : Do not over torque bolts
Item # ACC7004
Product Dimension: 21.3Wx21.3Dx19.7H”

Step 1: Assemble Crossbeams (B and C) into
Leg frame (D) by using flat washer (HW3) and
Hex Bolt (HW1). Inert the Hex bolt into the
Flat washer by using the Allen key (HW4).
Step 2: Place the assembled Leg frame and
Crossbeams onto Table Top (A).
Step 3: Assemble pieces by inserting the Hex bolt
(HW2) into the Flat washer (HW3). Tighten all bolts
by using the Allen key (HW4).
PREPARATION
*Beforebeginningassembly of product,make sureallparts are present.Compare parts with package contents listand hardware contents list.
*Ifanypartis missingor damaged, do notattemptto assembletheproduct.
*EstimatedAssemblyTime:20 minutes.
*Toolsrequired forAssembly(included):Allen Key
*If you are havingdifficulty,ourfriendlyCustomerCare team is always here to help.Please [e-mail]
Hardware is located inside the box. You can find them placed near the sign ‘HARDWARE INSIDE’