Safavieh Furniture Estes DCH8802 User manual

CARE AND MAINTENANCE
PIECE DESCRIPTION PICTURE QTY PIECE DESCRIPTION PICTURE QTY PIECE DESCRIPTION PICTURE QTY
AFront leg 2x HW1 Dowel Ø10X30mm 1x HW4
Flat washer
2mm 16x
BSeat frame 1x HW2 Bolt 6X0.5X50mm 16x HW5 Allen key 1x
CBack leg frame 1x HW3
Split lock washer
2mm
16x
Part List and Hardware List
* Before beginning assembly of product, make sure all parts are present.Compare parts with part contents list and
hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time : 10 minutes.
* Tools Required for Assembly (included): Allen Key
WOOD CARE: Always use felt pads under -all ar ticles to prevent discoloration or softening of the
lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills - im mediately and
avoid common hazards such as hot dishes, harsh solvents and abrasives. Cleaning should be done
with a soft lint free cotton cloth dampened with water should be done with a soft lint free cotton
cloth dampened with water or furniture polish. On highly used surfaces we recommend applying a
quality paste wax which should be used on a regular basis to - pro vide additional protection from
scratches and spills. How often you apply the wax depends on how much wear the furniture
receives.
UPHOLSTERY: To prevent overall soiling, frequent vacuuming or light brushing is recommended.
Cushions and - pil lows should be turned on a weekly basis. Down-filled cushions should be
brushed rather than vacuumed. Spot clean, using a mild water-free solvent or dry cleaning
product. Only a professional cleaner should undertake a complete overall cleaning. The use of
steam or water-based clearners may cause excessive shrinking or staining.
NOTICE
* Please make sure that you have all parts indicated and they are good condition before you begin assembly of this
item.Refer to part list and hardware list below for guidance.
* This item should be assembled on a soft surface to prevent scratching the finish during assembly.
* This item may require periodic tightening.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email
[e-mail]
PREPARATION
ITEM ID: DCH8802
ITEM DIMENSION: 16.69" x 20.79" x 33.27"
275

STEP 4: INSERT THE FRONT LEGS (A) AND SCREW IN THE BOLTS BUT DONˈT TIGHTEN
COMPLETELY
STEP 5: PUT THE CHAIR UPRIGHT AND MAKE SURE ALL LEGS ARE LEVEL, THEN FIRMLY TIGHTEN
BOLTS WITH ALLEN KEY WHILE THE CHAIR IS UPRIGHT AS PICTURED ABOVE
STEP 1: ATTACH BACK LEG FRAM (C) AND SEAT FRAM (B) BUY USING
DOWEL (HW1)
STEP 2: PUT THE WASHERS ON THE BOLT IN THE
ORDER SHOWN IN THE PICTURE
STEP 3: INSERT THE BACK LEGS (C) AND SCREW IN THE BOLTS BUT
DONˈT TIGHTEN COMPLETELY
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
PREPARATION