Safavieh Furniture Nicolai DTB 1405 User manual

Item Id : DTB 1405
Product Dimensions : 47.24” W x 47.24” D x 29.92” H
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or
softening of the lacquer. Plastic and rubber bases on items can
discolor wood. Wipe up spill immediately and avoid common hazards
such as hot dishes,harsh solvents and abrasives. Cleaning should be
done with a soft lint free cotton cloth dampened with water or furniture
polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide
additional protection from sratches and spills. How often you apply the
wax depends on how much wear the furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin
assembly this item.
* This item should be assembled on a soft surface to prevent scratching
the finish during assembly.
* This item may require periodic tightening.
* Requiring atleast two person to assemble the product
Weight Capacity : 165 lbs
PIECE DESCRIPTION PICTURE QUANTITY
Part List and Hardware List
Pedestal Cap
2x
1x
1x
C
D
E
Cross Rail Up/Down
Pedestal
Jcbc Bolt M8x0.5x60mm
Allen Key M5
8x
1x
8x
8x
HW 3
HW 1
HW 4
HW 5
HW 6
HW 7
Spring Washer 8mm
Flat Washer 8mm
1x
A
B
Table Top
Leg 4x
1x
16x
HW 2 8x
Csk Screw M4x2.0x30mm
Nut 13mm
Spanner 13mm
NOTE :
Phillip Screw Driver (Not Provided)
WARNING : DO NOT OVER TORQUE
BOLTS/SCREWS

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package content list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time : 20 minutes.
Step 1 Step 2
1 2
B
B
B
B
D
HW 4
HW 7
HW 3
HW 2
Assemble the leg and pedestal. Assemble the cross rail then tight it.
8x
HW 5
HW 6
C
C
Up
Down
8x

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package content list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time : 20 minutes.
Step 3 Step 4
3 4
Put upside down the table top, then tight the leg frame.
Make sure put on the smooth and clear surface, to avoid
the surface scratch.
Place the pedestal cap on the pedestal.
HW 1
A
E
Follow
Marking
16x