Safavieh Furniture FOX8201 User manual

180
APanel-1
B
C
Panel-2
leg
HW1
HW2
HW4
HW5
Flat washer 6mm
Allen key
1X
1X
4X
8X
4X
12X
12X
1X
Socket Screws 6x0.5x45MM
Socket Screws 6x0.5x35MM
Split Lock washer 6mm
HW3
Model# FOX8201
Product Dimensions:
51.18"Wx27.55"Dx17.71"H
PIECE QUANTITY
DESCRIPTION PICTURE
*Before beginning assembly of product, make sure all parts are present. Compare parts with part
contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 30 minutes.
*Tools Required for Assembly (included): Allen Key
PREPARATION
CARE AND MAINTENANCE
NOTICE
*Please make sure that you have all parts indicated and they are in good condition before you begin
assembly of this item. Refer to part list and hardware list below for guidance.
*This item should be assembled on a soft surface to prevent scratching the finish during
assembly.
*This item may require periodic tightening.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please
email [email protected]
Always use felt pads under all articles to prevent discoloration or softening of the lacquer. Plastic
and rubber bases on itcan discolor wood.Wipe up spills immediately and avoid common hazards
such as hot dishes, harsh solvents and abrasives. Cleaning should be donewith a soft lint free
cotton cloth dampened with water or furniture polish. On highly used surfaces we recommend
applying a quality pastewax which should be used on a regular basis to provide additional protection
from scratches and spills. How often you apply the wax depends onhow much wear the furniture
receives. Part List and Hardware List

STEP1:
Attach leg (C) to Panel-2(B) using Socket Screws 6x0.5x35MM(HW2) Split
Lock washer 6mm (HW3) and Flat washaer 6mm (HW4)，Tighten with Allen Key
(HW5)
*Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.*If any part is missing or damage
d, do not attempt to assemble the product.
*Estimated Assembly Time: 30 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
PREPARATION
STEP2:
Attach leg (C) to Panel-1 (A) using Socket Screws 6x0.5x45MM (HW1)
Split Lock washer 6mm (HW3) and Flat washaer 6mm(HW4),Tighten with Allen Key
(HW5)
HW5
HW2
HW3
B
HW4
C
HW4
HW5
HW1
HW3
A
B