Safavieh Furniture FOX8505 User manual

Model# FOX8505
Product Dimensions: 26.8"W*28"D*42.3~45.3"H
PIECE QUANTITY
(1) 1X
(2) 1X
(3)
1X(R,L)
(4)
1X
(5)
1X
(6)
1X
(7)
5X
(8)
2X
(9)
6X
(10)
4X
(11)
2X
(12)
14X
(13)
1X
Short Screw
Long Screw
Washer
Allen Wrench
Caster
Medium Screw
Longer Screw
CARE AND MAINTENANCE
Wipe clean with a soft, dry cloth. The seat board can be cleaned with a mild cleaner.
Test the cleaning method on a hidden area before using them over the entire area .
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Star Base
Control Mechanism
Cylinder Column
Part List and Hardware List
Arms (R & L)
DESCRIPTION
PICTURE
Back Cushion
Seat Cushion

Step 1 Step 2 Step 3
Step 4 Step 5 Step 6
The chair is ok now.
ATTENTION: MAKE SURE ALL SCREWS ARE
FULLY TIGHTENED BEFORE USING CHAIR
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Wrench
Insert five Casters (7) into Star Base (6),
push hard until you feel or hear the
Caster(7) snap into place. Insert the LARGE
end of Cylinder Column (5) into the Star
Base (6) and carefully press downward with
moderate force until it is fully seated.
Connect the armrests(3) to seat(2)
by using six Medium Screws(9) and
six Washers(12).
Attach Control Mechanism (4) to Seat Assembly (2) with
the arrow towards the front of the chair, using four
Washers (12) and two Short Screws(8) and two Longer
Screws(11).
Now insert the small end of Cylinder
Column (5) into Control Mechanism
(4) and carefully press downward
with moderate force until it is fully
seated.
Assemble the Seat(2) to the Back(1) together,using
four Long Screws(10) and four Washers(12).
FULLY TIGHTEN ALL SCREWS USING ALLEN
WRENCH
PREPARATION