Safavieh Furniture Kylie Rattan PAT4011A User manual

PIECE QUANTITY
A1X
B1X
C1X
D1X
H1 2X
H2 4X
H3 6X
H4 6X
H5 1X
Model#PAT4011A
Product Dimenions: 31.5"D x 30"H
Screw-L (M6*55mm)
Leg-3
Flat Washer
Allen Key
DESCRIPTION
PICTURE
Table Top
CARE AND MAINTENANCE
Dust with a dry cloth. Do not use abrasive cleaner. Use glass cleaner to clean surface of
table top.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly
* This item may require periodic tightening
Part List and Hardware List
Leg-1
Screw-S (M6*22mm)
Spring Washer
Leg-2

PREPARATION
STEP4 USE SCREW (H2) AND SECURE BOLTS TIGHTLY
STEP5 REPEAT STEPS 3-4 FOR LEG ( C) AS INDICATED IN
PICTURE ABOVE
STEP6 REPEAT STEPS 3-4 FOR LEG ( D) AS INDICATED IN
PICTURE ABOVE.
STEP2 INVERT LEG (B) AND ALIGN HOLE TO THREAD
OPENING OF TABLETOP (A)
STEP3 PUT THE WASHERS ON THE BOLT IN THE ORDER
SHOWN IN THE PICTURE
STEP1 PLACE TABELTOP (A) FACE DOWN ON A SMOOTH
SURFACE
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 8 minutes.
Tools Required for Assembly (included): Allen Key
STEP7 USE SCREW (H1) AND SECURE BOLTS TIGHTLY (THE TWO
THREAD OPENINGS ARE LOCATED PERPENDICULAR TO TABLE TOP).
SECURE ALL SCREWS TIGHTLY. THIS ITEM MAY REQUIRE PERIODIC
TIGHTENING
H2
H3
H4
H2
H3
H4
H5