Safavieh Furniture GENEVIEVE SFV6008A User manual

PIECE QUANTITY
A1X
B1X
C1X
D1X
E2X
F1 12X
F2 6X
G1X
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
SFV6008A GENEVIEVE 3-DRAWER WRITING DESK
Part List and Hardware List
DESCRIPTION
PICTURE
Box
Metal support small - front
Metal support small - back
Metal support big - base
Leg
Short Bolt
Long Bolt
Allen key
The legs, metal supports and hardware are located inside the
inner carton above the box

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
The legs, metal supports and hardware are located inside the
inner carton above the box
STEP1 ATTACH THE METAL SUPPORTS TO BOTH LEGS
AND SECURE THEM USING SMALL BOLTS AS SHOWN ON
THE PICTURE
STEP2 PUT THE TOP UPSIDE DOWN IN A PADDED AREA
AND ATTACH THE THE ASSEMBLED LEG ON IT. SECURE
THE LEG ATTACHED BY USING LONG BOLTS AS SHOWN
ON THE PICTURE
STEP3 THE DESK IS READY TO USE