Safavieh Furniture Joel FOX4272 User manual

Model# FOX4272
Product Dimensions:25"WX14"DX63"H
PIECE QUANTITY
A2X
B1X
C1X
D2X
E1X
F1X
G1X
H1X
I1X
DESCRIPTION
PICTURE
CARE AND MAINTENANCE
Always use felt pads under allarticles to prevent discoloration or softening of the
lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills
immediately and avoid common hazards such as hot dishes,harsh solvents and
abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with
water or furniture polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide additional protection
from sratches and spills. How often you apply the wax depends on how much wear
the furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Part List and Hardware List
Metal frame
Metal plate
Metal bar
Tray
23.6"X11.8"X2.3"
Tray
23.6"X12.6"X2.3"
Metal plate
Tray
23.6"X10.2"X2.3"
Tray
23.6"X11"X2.3"
Tray
23.6"X13.3"X2.3"

H1 6X
H2 1X
H3 2X
H4 5X
H5 1X
H6 1X
H7 1X
Step 1 Step 2
Attach the Metal bar(B) to the Metal frame (A), using Allen bolt (H1) Attach the Metal plate(C) to the Metal frame (A),using Allen bolt (H3)
Tighten with Allen key(H5) Tighten with Allen key(H6)
Allen bolt 1
M6X25mm
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
Allen bolt 2
M6X15mm
Allen bolt 3
M8X15mm
Wrench
Hex nut
Allen key S
M6
Allen key L
M8
2
1

Step 3 Step 4
Attach the Metal plate(D) to the Metal frame (A),using Allen bolt (H1) Attach the Metal plate(D) to the Metal frame (A),using Allen bolt (H1)
and Hex nut (H4) and Hex nut (H4)
Tighten with Allen key(H5) and Wrench(H7) Tighten with Allen key(H5) and Wrench(H7)
Step 5 Step 6
Using Allen bolt (H2) and Hex nut (H4) to tighten the Metal Put Trays(E,F,G,H,I) on the Shelves.
plates (D) with Allen key (H5) and Wrench (H7)
4
3
6
5