Safavieh Furniture DTB1402 User manual

NOTICE
* Please make sure that you have all parts indicated and they are in good
hardware list below for guidance.
the finish during assembly.
* If you are having difficulty, our friendly Customer Care team is always
here to help. Please email [email protected]
PREPARATION
* Before beginning assembly of product, make sure all parts are present.
Compare parts with part contents list and hardware contents list.
product
15 minutes.
* Tools required for assembly (included) : Allen key
CARE AND MAINTENANCE
spill immediately and avoid common hazards such as hot dishes, harsh solvents
dampened with water or furniture polish. On highly used surfaces we
recommend applying a quality paste wax which should be used on a regular
you apply the wax depends on how much wear the furniture receives.
Item Id : DTB1402
Product Dimensions : 51.18” (39.37”) W x 31.49” D x 29.13” H
Weight capacity - 248 LBS
Warning : Do not stand on table.
Warning : Do not over torque bolts.
PIECE DESCRIPTION PICTURE QUANTITY
Part List and Hardware List
ATable Top
1x
B Table Leg 4x
HW 1 Jcbb Bolt M8 x 0.5 x 70mm 8x
HW 2 Spring Washer 8mm 8x
HW 3 Flat Washer 8mm 8x
HW 4 Allen key 1x

PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
uct.
* Tools required for assembly (included) : Allen key
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
Step 1 : Place the table leg (B) in posion and screw in the bolts (HW1). Put the washer (HW2,HW3) on the bolts (HW1) in the order shown
in the picture.

HOW TO USE
Step 1 Step 2 Step 3
Unlock the table lock and glide at
both side.
Please push from both
side, allign the brass pin
with the hole. (same for both,
open and close)
Lock the table lock and glide
at both side when the left
and right top panel are
close with each other.
Step 4 Step 5 Step 6