Safavieh Furniture Ryder ACC5713 User manual

Item# ACC5713
Product Dimensions: 19''W x 15.75''D x 26''H
Weight Capacity: 40LBS
PIECE QUANTITY
A 1X
B 4X
C 1X
D 4X
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the lacquer.
Plastic and rubber bases on items can discolor wood. Wipe up spills immediately and
avoid common hazards such as hot dishes,harsh solvents and abrasives. Cleaning should
be done with a soft lint free cotton cloth dampened with water or furniture polish. On highly
used surfaces we recommend applying a quality paste wax which should be used on a
regular basis to provide additional protection from sratches and spills. How often you apply
the wax depends on how much wear the furniture receives.
NOTICE
Part List
DESCRIPTION PICTURE
Bottom Board
Foot
Warning: Do not stand on the Table
Warning: Do not over torque bolts.
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly
* This item may require periodic tightening
* This item may require a pair of pliers to unscrew the screws to a suitable length during
assembly when feet are too short to fit into the item.
Table Top
Leg

Step 1 Step 2 Step 3
Take all packaging off the table.Screw four Put the bottom board over the end of four legs, Turn the table up to right side,
legs to the table top and gently tighten the legs. Screw four feet thourgh bottom board to assembling process done.
connect with legs.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 5 minutes.
2
13
A
C
BD