Safavieh Furniture Landers ACC5708 User manual

Item# ACC5708
Product Dimensions: 19''W x 15.75''D x 26''H
PIECE QUANTITY
A 1X Weight Capacity: 40LBS
B 4X Warning: Do not stand on the table
C 1X Warning: Do not over torque bolts.
D 4X
Foot
Leg
Bottom board
DESCRIPTION PICTURE
Table Top
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the lacquer. Plastic
and rubber bases on items can discolor wood. Wipe up spills immediately and avoid common
hazards such as hot dishes,harsh solvents and abrasives. Cleaning should be done with a soft lint
free cotton cloth dampened with water or furniture polish. On highly used surfaces we
recommend applying a quality paste wax which should be used on a regular basis to provide
additional protection from sratches and spills. How often you apply the wax depends on how
much wear the furniture receives.
Part List and Hardware List
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item.
Refer to part list and hardware list below for guidance.
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly
* This item may require periodic tightening
* This item may require a pair of pliers to unscrew the screws to a suitable length during
assembly when feet are too short to fit into the item.
PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 5 minutes.

PREPARATION
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 5 minutes.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
Step 1: Take all packaging off the table. Screw four legs
to the table top and gently tighten the legs.
Step 2: Put the bottom board over the end of four
legs, Screw four feet thourgh bottom board to
connect with legs.
Step 3: Turn the table up to right side. Assembling process
done.
A
B
C
D