Safavieh Furniture Mitchell FOX3001 User manual

* Please make sure that you have all parts indicated before you begin assembly of this item Model# FOX3001
* This item should be assembled on a soft surface to prevent scratching the finish during assembly Product Dimensions:18.5“WX15.35“DX29.53“-38.58“H
* This item may require periodic tightening
PIECE LENGTH QUANTITY
A 1X
B 1X
C 1X
D 1X
H1 M10*30mm 3X
H2 M6*15mm 4X
H3 1X
H4 1X
2X
Allen key L
Allen bolt S (For column)
Allen key S
Spare black plastic cap
SEAT
Base
Allen bolt L (For base)
Gaslift
Column
CARE AND MAINTENANCE
Wipe clean with a soft, dry cloth. The seat board can be cleaned with a mild cleaner. Test
the cleaning method on a hidden area before using them over the entire area .
NOTICE
Part List and Hardware List
DESCRIPTION PICTURE

Step 1 Step 2 Step 3
Align the gas lift (C) onto the base as pictured. Remove the black cap on the top of the gas lift. Align the column (D) onto middle of the frame as pictured.
Use allen key “H3” to lock the 3 screws “H1”. Use allen key “H4” to lock the 4 screws “H2”.
Step 4 Step 5
Place the assembled seat onto the base The height can be adjusted by holding the handle underneath the seat.
and make sure it is placed vertically.
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
PREPARATIO
N
1
4
35
3233