Safavieh Furniture Elspeth BCT2501 User manual

NOTICE
* Please make sure that you have all parts indicated and they are in good condition
before you begin assembly of this item. Refer to part list and hardware list below for
guidance.
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly.
*This item may require periodic tightening.
* If you are having difficulty, our friendly Customer Care team is always here to help.
Please email [e-mail]
PREPARATION
Model # BCT2501
Product Dimensions: 28.5"W X 19"D X 34.25"H
* Before beginning assembly of product, make sure all parts are present. Compare parts
with part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
CARE AND MAINTENANCE
Dust with a soft, dry cloth. Do not use abrasive cleaner. To clean glass, spray a small
amount of glass cleaner onto a lint-free cloth and wipe glass clean. Wipe spills
immediately. Maintain with regular dusting and clean with mild soap and water, dry
thoroughly and do not use a brass cleaner. Adhesive felt pads should always be
used/applied in order to prevent damage to the furniture or surfaces on which the
furniture is placed.
Part List and Hardware List
Piece Description Picture Quantity
A Top/shelf 2 X
B Middle leg 4 X
C Handle 2 X
D Feet 4 X
E Wheel 4 X
F Mirror 2 X
HW1 Glass mat 8 X
HW2 Wrench 1 X

Preparation
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 10 minutes.
*Tools Required for Assembly (included):Wrench
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
Step 1
Attach handles (C) to top/ shelf (A), then place
assembled piece upside down and attach middle
legs (B) onto bottom of top/shelf
Step 2
Attach the shelf to legs, screw the long and short
feet on it, then use wrench to tighten the wheels
Step 3
Place mirrors (F) onto both shelves, top and bottom.