Safavieh Furniture Louise Retro Mid Century FOX4283 User manual

Model# FOX4283
Product Dimensions:35-2/5"WX11-4/5"DX50-2/5"H
PIECE QUANTITY
A1 1X
A2 3X
B1 3X
B2 1X
C1 1X
C2 1X
C3 1X
C4 1X
Panel
DESCRIPTION
PICTURE
CARE AND MAINTENANCE
Always use felt pads under allarticles to prevent discoloration or softening of the
lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills
immediately and avoid common hazards such as hot dishes,harsh solvents and
abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with
water or furniture polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide additional protection
from sratches and spills. How often you apply the wax depends on how much wear the
furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Part List and Hardware List
Panel
Panel
Panel
Metal frame
Metal frame
Metal frame
Metal frame

H1 6X
H2 14X
H3 8X
H4 1X
H5 6X
Step 1 Step 2 Step 3
Attach the Screw(H3) to Panel(A1),Panel(A2) Attach the Metal frame(C1) to Panel(A1), using Allen bolt(H2) Attach the Panel(A2) to Panel(B1),using Allen bolt and washer(H1&H5)
Tighten with philips driver Tighten with Allen key(H4) Tighten white Allen Key(H4)
Attach the Panel (B1) to Panel (A1),tighten with philips driver Attach the Panel(A2) to Metal frame(C1),using Allen bolt(H2)
Tighten white Allen Key(H4)
Washer
Screw
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
Allen bolt L
M6X30mm
Allen bolt S
M6X20mm
Allen key
1
2
3
4

Step 4 Step 5 Step 6
Attach the Metal frame(C2) to Panel(A2), using Allen bolt(H2)
Attach the Panel(A2) to Panel(B1),using Allen bolt and washer(H1&H5)
Attach the Metal frame(C3) to Panel(A2), using Allen bolt(H2)
Tighten with Allen key(H4) Tighten white Allen Key(H4) Tighten with Allen key(H4)
Attach the Panel (B1) to Panel (A2),tighten with philips driver Attach the Panel(A2) to Metal frame(C2),using Allen bolt(H2) Attach the Panel (B1) to Panel (A2),tighten with philips driver
Tighten white Allen Key(H4)
Step 7 Step 8
Attach the Panel(A2) to Panel(B1),using Allen bolt and washer(H1&H5) Attach the Metal frame(C4) to Panel(A2), using Allen bolt(H2)
Tighten white Allen Key(H4) Tighten with Allen key(H4)
Attach the Panel(A2) to Metal frame(C3),using Allen bolt(H2) Attach the Panel (B2) to Panel (A2),tighten with philips driver
Tighten white Allen Key(H4)
4
5
6
7
8