Safavieh Furniture Alora BCT2502 User manual

NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
*This item may require periodic tightening
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email
[e-mail]
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list
and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): Allen Key
Model # BCT2502
Product Dimensions: 32"Wx18.25"Dx34.25"H
CARE AND MAINTENANCE
Dust with a soft, dry cloth. Do not use abrasive cleaner. To clean glass, spray a small amount of glass cleaner
onto a lint-free cloth and wipe glass clean. Wipe spills immediately. Maintain with regular dusting and clean
with mild soap and water, dry thoroughly and do not use a brass cleaner. Adhesive felt pads should always be
used/applied in order to prevent damage to the furniture or surfaces on which the furniture is placed.
Part List and Hardware List
Piece Description Picture Quantity
A Leg 1 X
B Leg 1 X
C Top 1 X
D Middle Shelf 1 X
E Bottom Shelf 1 X
F Middle Shelf 1 X
G Middle Bar 2 X
H Rack 1 X
ICaster 4 X
J Bucket 1 X
K Lid 1 X
HW1 Allen Bolt（M6x1x10mm) 16 X
HW2 Phillips Screw（M5x1x20mm) 4 X
HW3 Phillips Screw（M5x1x10mm) 4 X
HW4 Allen Key 1 X
HW5 Wrench 1X

Preparation
*Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*If any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 10 minutes.
*Tools Required for Assembly (included):Allen Key
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
Attach legs (A) (B) to top (C) by using Allen
Bolt(HW1).
*Do not fully tighten the bolts until the product
is fully assembled.
Attach legs (A) to middle shelf (D) by using Allen Bolt (HW1).
*Do not fully tighten the bolts until the product is assembled.
Attach legs (A) (B) to bottom shelf (E) by using Allen Bolt
(HW1). Then install the caster wheels (I) by using wrench
(HW5). *Do not fully tighten the bolts until the product is
assembled.
Attach rack (H) to middle bar(G).
*Do not fully tighten the bolts until the
product is assembled.
Attach leg (A) to middle shelf (F) by using Allen
Bolt (HW3). Attach middle shelf (F) to bottom
shelf (E) by using Allen Bolt(HW2).
*Do not fully tighten the bolts until the product
is assembled.
Attach leg (B) to rack (H) by using Allen
Bolt (HW3). Attach middle bar (G) to
bottom Shelf (E) by using Allen Bolt
(HW2)Tighten all Allen Bolt.
Place bucket (J) onto top (C). Place
lid (K) over bucket.