Safavieh Furniture Nadine SEA8029-F User manual

PIECE QUANTITY
PICTURE
HEADBOARD
DESCRIPTION
Product Dimensions : 58.2"W x 8"D x 55.1"H
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the
lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills
immediately and avoid common hazards such as hot dishes, harsh solvents and
abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with
water or furniture polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide additional protection
from sratches and spills. How often you apply the wax depends on how much wear
the furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Model # SEA8029-F
Part List and Hardware List
B
C+D+EC+D+E
C
D
E
A
B
PIECE QUANTITY
A 1X
B 2X
C 6X
D 6X
E
6X
WASHER M8
RING M8
PICTURE
HEADBOARD
WOODEN LEG
BOLT 8X50
DESCRIPTION
B
C+D+EC+D+E
C
D
E
A
B

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
CE
A
Step 1 Step 2
The hardware needed to connect the legs (B) to the headboard
(A) are bolt (C), washer (D) and ring (E)
Attach the two legs (B) to the headboard (A) using 6 bolts (C ), 6
washers and 6 rings.Others 6 bolts, washers and rings are attached on
the legs.
B
C+D+EC+D+E
D
B

PIECE QUANTITY
Product Dimensions : 79.5"W x 8"D x 55.1"H
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the
lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills
immediately and avoid common hazards such as hot dishes, harsh solvents and
abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with
water or furniture polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide additional protection
from sratches and spills. How often you apply the wax depends on how much wear
the furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Model # SEA8029-K
Part List and Hardware List
PICTURE
HEADBOARD
DESCRIPTION
B
C+D+EC+D+E
C
D
E
A
B
PIECE QUANTITY
A 1X
B 2X
C 6X
D 6X
E
6X
PICTURE
HEADBOARD
WOODEN LEG
BOLT 8X50
DESCRIPTION
WASHER M8
RING M8
B
C+D+EC+D+E
C
D
E
A
B

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
CE
A
Step 1 Step 2
The hardware needed to connect the legs (B) to the headboard
(A) are bolt (C), washer (D) and ring (E)
Attach the two legs (B) to the headboard (A) using 6 bolts (C ), 6
washers and 6 rings. Others 6 bolts, washers and rings are attached
on the legs.
B
C+D+EC+D+E
D
B

PIECE QUANTITY
Product Dimensions : 64"W x 8"D x 55.1"H
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the
lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills
immediately and avoid common hazards such as hot dishes, harsh solvents and
abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with
water or furniture polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide additional protection
from sratches and spills. How often you apply the wax depends on how much wear
the furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Model # SEA8029-Q
Part List and Hardware List
DESCRIPTION
PICTURE
HEADBOARD
B
C+D+EC+D+E
C
D
E
A
B
PIECE QUANTITY
A 1X
B 2X
C 6X
D 6X
E
6X
DESCRIPTION
PICTURE
HEADBOARD
WOODEN LEG
BOLT 8X50
WASHER M8
RING M8
B
C+D+EC+D+E
C
D
E
A
B

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
CE
A
Step 1 Step 2
Attach the two legs (B) to the headboard (A) using 6 bolts (C ), 6
washers and 6 rings. Others 6 bolts, washers and rings are attached
on the legs.
The hardware needed to connect the legs (B) to the headboard
(A) are bolt (C), washer (D) and ring (E)
B
C+D+EC+D+E
D
B

PIECE QUANTITY
DESCRIPTION
PICTURE
HEADBOARD
Product Dimensions : 43.3"W x 8"D x 55.1"H
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the
lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills
immediately and avoid common hazards such as hot dishes, harsh solvents and
abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with
water or furniture polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide additional protection
from sratches and spills. How often you apply the wax depends on how much wear
the furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Model # SEA8029-T
Part List and Hardware List
B
C+D+EC+D+E
C
D
E
A
B
PIECE QUANTITY
A 1X
B 2X
C 6X
D 6X
E
6X
WASHER M8
RING M8
DESCRIPTION
PICTURE
HEADBOARD
WOODEN LEG
BOLT 8X50
B
C+D+EC+D+E
C
D
E
A
B

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and
hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
CE
A
Step 1 Step 2
Attach the two legs (B) to the headboard (A) using 6 bolts (C ), 6
washers and 6 rings. Others 6 bolts, washers and rings are attached
on the legs.
The hardware needed to connect the legs (B) to the headboard
(A) are bolt (C), washer (D) and ring (E)
B
C+D+EC+D+E
D
B