Safavieh Furniture SFV9704 User manual

ITEM ID : SFV9704
PRODUCT DIMENSION : 10"WX10"DX17.5"H
Weight Capacity : 22.5 lbs
WARNING : DO NOT SIT ON THE ACCENT TABLE
WARNING : DO NOT OVER TORQUE BOLTS/SCREWS
WARNING : DO NOT DRAG THE ACCENT TABLE
NOTICE
PREPARATION
* Before beginning assembly of product, make sure all parts are present.
Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly Time: 10 minutes.
* Require 1-2 person for assembly.
CARE AND MAINTENANCE
- Blot up spills immediately, always use coasters on table tops under beverages. Use trivets or mats
under hot dishes or cookware. Clean with warm water and dry surface immediately aer cleaning.
Do not use cleaners that contain acid such as bathroom cleaners, grout cleaner, and le cleaners.
Do not use abrasive cleaners in either dry or liquid forms. Use a cleaner and polish formulated for
marble surfaces.
PARTS & HARDWARE LIST
Piece Descripon Picture Quanty
Round Marble Top
Base
A
B
1x
1x
Carton call
1 of 2
2 of 2
WARNING
* Please make sure that you have all parts indicated and they are in good condion before you begin
assembly of this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a so surface to prevent scratching the finish during assembly.
* This item may require periodic ghtening.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email
[e-mail]

A1x
B1x
STEP 2: Align the screw threads of the base to the screw in the top.STEP 1: Carefully place the base on a flat surface & carefully place the top over
the base as shown.
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not aempt to assemble the product.
* Esmated Assembly Time: 10 minutes.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email [e-mail]
STEP 3: Gently rotate the top in a clockwise direcon unl firmly screwed in.
*Note-Tightening too much can damage the base insert.