Safavieh Furniture Katie AMH4026A User manual

PIECE QUANTITY
A1X
B2X
C2X
D1X
E2X
H1 8X
H2 8X
H3 4X
H4
4X
H5
1X
H6 2X
(4x30mm)
Screw
Front leg
Allen Bolt (small)
(8x25mm)
Spring washer
Bottom shelf
Feet
Product Dimensions: 42.5"WX15.25"DX32"H
Allen Bolt (large)
(8x35mm)
PICTURE
Table top
Flat washer
Back leg
DESCRIPTION
Model# AMH4026A
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the
lacquer. Plastic and rubber bases on items can discolor wood. Wipe up spills
immediately and avoid common hazards such as hot dishes, harsh solvents and
abrasives. Cleaning should be done with a soft lint free cotton cloth dampened with
water or furniture polish. On highly used surfaces we recommend applying a quality
paste wax which should be used on a regular basis to provide additional protection from
scratches and spills. How often you apply the wax depends on how much wear the
furniture receives.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this
item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Allen key
Part List and Hardware List

Step
Attach the front legs ( C) and back legs (B) to the table top (A) and use Allen key (H5) to tighten
washers and bolts. Then screw feet (E) into the front legs ( C) through the bottom shelf (D).
Use the screw (H6) to tighten the bottom shelf (D) and the back legs (B)
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents
list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen key
PREPARATION