Safavieh Furniture Woodrow COF7013 User manual

PIECE
DESCRIPTION
PICTURE
QUANTITY
A
Table top
1x
B
Leg board
2x
HW1
Lead screw: 8x418mm
4x
HW2
Hex bolt: 6x0.5x20mm
8x
HW3
Flat washer: 6mm
8x
HW4
Flat washer: 8mm
4x
HW5
Nut: 8mm
4x
HW6
Socket wrench
1x
HW7
Allen key
1x
HW8
Wooden dowel
8x
HW9
Steel corner
2x
NOTICE
*Please make sure that you have all parts indicated and they are in goodcondition beforeyoubeginassemblyof
thisitem.Referto part list andhardware list below forguidance.
*Thisitemshouldbe assembled on asoftsurfaceto prevent scratching the finish during assembly.
*Thisitemmayrequireperiodictightening.
*If you are havingdifficulty,ourfriendlyCustomer Careteamis always here to help.Pleaseemail
[e-mail]
PREPARATION
*Before beginningassembly of product,makesure allpartsare present.Compare parts withpackage contents list
andhardwarecontentslist.
*Ifanypart is missingor damaged,do notattempt to assemble theproduct.
*EstimatedAssemblyTime:20 minutes.
*Tools required for Assembly (included):Allen Key
CARE AND MAINTENANCE
Always use feltpads underallarticles to preventdiscolorationor softeningof the lacquer.Plasticandrubberbases
on itemscandiscolorwood.Wipe up spills immediatelyand avoid common hazards such as hotdishes,harsh
solventsandabrasives.Cleaningshouldbe donewith a softlint free cottonclothdampenedwihtwateror furniture
polish.
On highly used surfaces we recommendapplyinga qualitypastewaxwhichshould be used on aregularbasis to
provide additionalprotection from scratches andspills.How often you applythewaxdependson howmuchwear
the furniturereceives.
Part List and Hardware List
Weight Capacity : 132 LBS
Warning : Do not stand on table
Warning : Do not over torque bolts
Item # COF7013
Product Dimension: 43.3Wx23.6Dx16.9H”

Step 1: Insert the Lead screw(HW1) and Wooden dowel(HW8) into the holes on
Table Top(A) in order.
Step 2: Cross the Lead screws, put the Leg board(B) on the Table top. Put the Flat
washer(HW3) and Nut(HW5) on lead screw, tighten them by using Socket
wrench(HW6).
Step 3: Align the Steel corner(HW9) to the holes on Table top and Leg board, put
the Flat washer(HW4) on the Hex bolt(HW2), insert it into the hole, tighten them
by using Allen key(HW7).
Step 4: Repeat Step 3. Tighten all the bolts.
PREPARATION
*Beforebeginningassemblyof product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
*Ifanypart is missingor damaged,do notattempt to assemble theproduct.
*EstimatedAssemblyTime:20 minutes.
*Tools required for Assembly (included):Allen Key
*If you are havingdifficulty,ourfriendlyCustomer Care teamis always here to help. Pleaseemail [e-mail]
Hardware is located inside the box. You can find them placed near the sign ‘HARDWARE INSIDE’