Safavieh Outdoor PAT6757 User manual

1
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
NOTICE
* Please make sure all parts are included before you begin assembly of this item.
* This item should be assembled on a soft surface to prevent scratching the finish during
assembly
* This item may require periodic tightening
Parts List and Hardware List
O U T D O O R
WARNING: DO NOT STAND ON BENCH & TABLE
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
ID Q.tysPICTURE & DESCRIPTION ID Q.tysPICTURE & DESCRIPTION
1
6
7
8
2
3
a
b
c
4
5
32X 4X
4X
1X
1X
32X
6X
6X
4X
1X
1X
92X
Item# PAT6757
Product dimension:
ASSEMBLY INSTRUCTIONS FOR SAFAVIEH
LARDNER LIVING
THE DESIGN OF LARDNER LIVING IN THE DRAWINGS MAY VARY
FROM ACTUAL, BUT ASSEMBLY CAN BE APPLIED
FOR THIS ITEM
Bench: 53W x 27D x 28.5H (Inches)
Chair: 25W x 27D x 28.5H (Inches)
Table: 41.5W x 21.3D x 14.2H (Inches)
Weight Capacity: 704 lbs per bench & 55 lbs per table

2
PREPARATION
Tighten 70% Tighten 100%
Step 2: Fully tighten using Key (c)
Step 1: Attach wood leg (1 & 2) to front and back of the chair
respectively, using a & b. Loosen the bolt to balance the chair first
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly: Allen Key (included)

3
PREPARATION
Tighten 70% Tighten 100%
Step 1: Attach wood leg (1 & 2) to front and back of the bench
respectively, using a & b. Loosen the bolt to balance the bench first
Step 2: Fully tighten using Key (c)
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.

4
Step 1: Attach wood leg (3) to frame, using a & b. Loosen the bolt
to balance the table first
Step 2: Fully tighten using Key (c) after that put
the glass on top table
Step 3: Put all cushions on the chairs and bench