Safavieh Outdoor Viora PAT7710 User manual

Part List and Hardware List
PIECE
1
2
3
4
5
6
7
8
B
C
D
E
F
DESCRIPTION
Allen Bolt(M6x15 mm)
Box Top Frame
Allen Bolt(M6x40 mm)
Flat Washer
Allen Key
Allen Bolt(M6x30 mm)
PICTURE QUANTITY
1X
1X
9X
12X
Back Frame
1X
1X
1X
1X
1X
1X
Right Frame
Left Frame
Seat Frame
Front Frame
9
Box Right Side Frame
Box Front Frame
A
Model# PAT7710
Product Dimensions:
54.72"x23.62"x32.68"H
Seat Cushion
Gaslift
G
Allen Bolt(M6x50 mm) 1X
H
I
Washer (M6 X 5 mm)
Washer (M6 X 10 mm)
1X
1X
J
K
Nut
Key
1X
1X 1-4
Box Left Side Frame 1X
10
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
Weight Capacity : 275 Ibs (single seat)
550 Ibs (two person seat)
Warning : Do not stand on bench
Warning : Do not over torque bolts/screws
2X
1X
4X
26X
2X

4
5
D
2
D
C
D
C
1
3
STEP 1: Connect Seat Frame (4) and Front Frame (5), tighten Bolt (D), Flat
Washer (F) with Allen Key (G).
STEP 2: Connect The Part from STEP 1 and Left Frame (2), tighten Bolt
(D),(C), Flat Washer (F) with Allen key (G).
STEP 3: Connect The Part from STEP 2 and Right Frame (1), tighten Bolt
(D),(C), Flat Washer (F) with Allen Key (G). STEP 4: Connect The Part from STEP 3 and Back Frame (3)
G
G
G
2-4

STEP 5: Connect The Part from STEP 4, tighten Bolt (D),(C), Flat Washer (F)
with Allen Key (G).
D
C
C
STEP 6: Connect The Part from STEP 5 and Box Right Side Frame (7)& Box
Left Side Frame (8), tighten Bolt (C), Flat Washer (F) with Allen Key (G).
7
8
CC
STEP 7: Connect The Part from STEP 6 and Front Box Frame (6), tighten
Bolt (C),(E), Flat Washer (F) with Allen key (G).
6
CC
E
STEP 8: Connect The Part from STEP 7 and Box Top Frame (9).
G
G
G
3-4
9

STEP 9: Connect The Part from STEP 8, tighten Bolt (B), Flat Washer (F),
with Allen Key (G).
STEP 10: Connect The Part from STEP 9 and Gaslift (A), tighten Bolt (C), Flat
Washer (F),Washer (H),(I) and Nut (J) with Allen Key (G), Key (K).
C
I
H
Finish.
C
4-4
HC
A
G
A
C
G
A
BB
G
10
10
STEP 11: Put Seat Cushion (12) on Chair.
I
J
J
K