Safavieh Outdoor PAT7704-1/4 User manual

CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
Model# PAT7704-1/4
Product Dimensions:
74.8"x35.43"x29.13" H (Table)
22.44"x22.44"x34.65" H (Chair)
Weight Capacity : 275 Ibs (single seat)
550 Ibs (two person seat)
Warning : Do not stand on bench
Warning : Do not over torque bolts/screws
1-3
PIECE
1
2
3
4
5
6
7
8
A
B
C
D
E
DESCRIPTION
Allen bolt(M6x20 mm)
Middle table top frame
Allen bolt(M6x40 mm)
Table leg
Flat washer
Allen key
Allen bolt(M6x30 mm)
PICTURE QUANTITY
1X
2X
2X
4X
3X
8X
24X
40X
48X
112X
3X
Chair/ Back Frame
Table Glass
Seat Cushion
8X
8X
8X
8X
8X
1X
Chair/Right Frame
Chair/Left Frame
Chair seat
Chair front panel
9
10
Short table top frame
Long table corner fame 1
Long Table corner fame 2
11
12

CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
2-3
Weight Capacity : 275 Ibs (single seat)
550 Ibs (two person seat)
Warning : Do not stand on bench
Warning : Do not over torque bolts/screws
PIECE
6
7
8
A
D
DESCRIPTION
Allen bolt(M6x20 mm)
Middle table top frame
Flat washer
Allen key
PICTURE QUANTITY
1X
2X
2X
4X
24X
24X
1X
1X
9
10
Short table top frame
Long table top fame 1
Long Table top fame 2
E
Table leg
11 Table Glass 3X

STEP 3 :
10
10
10
10
STEP 1 : Connect Long Table Top Frame 1 (6) with Short Table Top Frame (8), Long Table Top Frame
2 (7) with Short Table Top Frame (8), tighten Bolt (A), Flat washer (D) with Allen key (E).
Connect The Part from STEP 2 and Table Leg (10), tighten Bolt (A), Flat Washer (D) with
Allen key (E).
A
6
7
8
8
STEP8
3 GH 3
3 J F 3 33
3STEP9
33
9
7
9
A
A
A
A
A
AA
AA
A
A
A
E
A
A
A
A
A
A
STEP 4 : Put on Table Glass (11) to finish Table.
STEP 2 : Connect The Part From STEP 1 and Middle Table Top (9) ,tighten Bolt (A), Flat washer
(D) with Allen key (E).
11
11
11
A
3-3

CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
Model# PAT7704-3/4
Product Dimensions:
74.8"x35.43"x29.13" H (Table)
22.44"x22.44"x34.65" H (Chair)
Weight Capacity : 275 Ibs (single seat)
550 Ibs (two person seat)
Warning : Do not stand on bench
Warning : Do not over torque bolts/screws
1-4
PIECE
1
2
3
4
5
6
7
8
A
B
C
D
E
DESCRIPTION
Allen bolt(M6x20 mm)
Middle table top frame
Allen bolt(M6x40 mm)
Table leg
Flat washer
Allen key
Allen bolt(M6x30 mm)
PICTURE QUANTITY
1X
2X
2X
4X
3X
8X
24X
40X
48X
112X
2X
Chair/ Back Frame
Table Glass
Seat Cushion
8X
8X
8X
8X
8X
1X
Chair/Right Frame
Chair/Left Frame
Chair seat
Chair front panel
9
10
Short table top frame
Long table corner fame 1
Long Table corner fame 2
11
12

CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
Weight Capacity : 275 Ibs (single seat)
550 Ibs (two person seat)
Warning : Do not stand on bench
Warning : Do not over torque bolts/screws
2-4
PIECE
1
2
3
4
5
DESCRIPTION
Allen bolt(M6x40 mm)
Flat washer
Allen key
Allen bolt(M6x30 mm)
PICTURE QUANTITY
20X
24X
44X
1X
Chair/ Back Frame
4X
4X
4X
4X
4X
Chair/Right Frame
Chair/Left Frame
Chair seat
Chair front panel
B
C
D
E
4X
Seat Cushion
12

STEP 1 :
1C
C
B
3
2
C
STEP 2 :
STEP 3 : STEP 4 :
x4
3-4
4
B
B
5
x4
x4
x4
Connect Chair Seat (4) and Chair Front Panel (5), tighten
Bolt (B), Flat washer (D) with Allen key (E).
Connect the Part from STEP 1 (4) and Right Frame (1),
tighten Bolt (B),(C), Flat washer (D) with Allen Key (E).
Connect the Part from STEP 1 (4) and Left Frame (2)
tighten Bolt (B), (C), Flat washer (D) With Allen key (E).
Connect the Part from STEP 3 (4) and Chair Back Frame (3)
C
B

B
B
C
C
12
4-4
STEP 5 :Connect the Part from STEP4 and Bolt (C) with
Allen key (E).
STEP 6 :
Connect the Part from STEP5 and Bolt (B) with Allen key (E).
STEP 7 : Put On Seat Cushion (12) to complete Chair.
x4 x4
x4 x4
FINISH

CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
Model# PAT7704-4/4
Product Dimensions:
74.8"x35.43"x29.13" H (Table)
22.44"x22.44"x34.65" H (Chair)
Weight Capacity : 275 Ibs (single seat)
550 Ibs (two person seat)
Warning : Do not stand on bench
Warning : Do not over torque bolts/screws
1-4
PIECE
1
2
3
4
5
6
7
8
A
B
C
D
E
DESCRIPTION
Allen bolt(M6x20 mm)
Middle table top frame
Allen bolt(M6x40 mm)
Table leg
Flat washer
Allen key
Allen bolt(M6x30 mm)
PICTURE QUANTITY
1X
2X
2X
4X
3X
8X
24X
40X
48X
112X
2X
Chair/ Back Frame
Table Glass
Seat Cushion
8X
8X
8X
8X
8X
1X
Chair/Right Frame
Chair/Left Frame
Chair seat
Chair front panel
9
10
Short table top frame
Long table corner fame 1
Long Table corner fame 2
11
12

CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when not in use.
Remove wooden furniture from standing water. Dust regularly with small brush or vacuum
Spills should be taken care of immediately before they harden or
stain with a slightly dampened sponge.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
Weight Capacity : 275 Ibs (single seat)
550 Ibs (two person seat)
Warning : Do not stand on bench
Warning : Do not over torque bolts/screws
2-4
PIECE
1
2
3
4
5
DESCRIPTION
Allen bolt(M6x40 mm)
Flat washer
Allen key
Allen bolt(M6x30 mm)
PICTURE QUANTITY
20X
24X
44X
1X
Chair/ Back Frame
4X
4X
4X
4X
4X
Chair/Right Frame
Chair/Left Frame
Chair seat
Chair front panel
B
C
D
E
4X
Seat Cushion
12

STEP 1 :
1C
C
B
3
2
C
STEP 2 :
STEP 3 : STEP 4 :
x4
3-4
4
B
B
5
x4
x4
x4
Connect Chair Seat (4) and Chair Front Panel (5), tighten
Bolt (B), Flat washer (D) with Allen key (E).
Connect the Part from STEP 1 (4) and Right Frame (1),
tighten Bolt (B),(C), Flat washer (D) with Allen Key (E).
Connect the Part from STEP 1 (4) and Left Frame (2)
tighten Bolt (B), (C) Flat washer (E) With Allen key (F).
Connect the Part from STEP 3 (4) and Chair Back Frame (3)
C
B

B
B
C
C
12
4-4
STEP 5 :Connect the Part from STEP4 and Bolt (C) with
Allen key (E).
STEP 6 :
Connect the Part from STEP5 and Bolt (B) with Allen key (E).
STEP 7 : Put Seat Cushion (12) on Chair to complete Chair.
x4 x4
x4 x4
FINISH