Safavieh Outdoor PAT9029 User manual

PIECE QUANTITY
*
Part List and Hardware List
PREPARATION
CARE AND MAINTENANCE
NOTICE
DESCRIPTION PICTURE
*Please make sure that you have all parts indicated and they are in good condition before you
begin assembly of this item. Refer to part list and hardware list below for guidance.
*This item should be assembled on a soft surface to prevent scratching the finish during
assembly.
*This item may require periodic tightening.
*If you are having difficulty, our friendly Customer Care team is always here to help. Please
email [email protected]
ITEMNO.:PAT9029
ItemDimension
1Seater：30.22''x33.33''x31.56''2Seater：5
6''x33.33''x31.56''
Table：40''x24.44''x17.78''
A
B
C
D
E
F
G
Chair
Foreleg
Hindleg
Loveseat
TableLeg
TableTop
TableGlass
2
6
6
1
4
1
1
*All associated cushions should be stored indoors in a dry clean environment when not in use.
*Before beginning assembly of product, make sure all parts are present. Compare parts with part
contents list and hardware contents list.
*If any part is missing or damaged, do not attempet to assemble the product.
*EstimatedAssemblyTime:30minutes.
ToolsRequiredforAssembly(included):AllenKey
HW1
HW2
Allen Key
48
1
HW3
48
Hexagon Socket Screw
6x0.5x150mm
Flat Washer 6mm

*Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.*If
any part is missing or damaged, do not attempt to assemble the product.
*Estimated Assembly Time: 20 minutes.
*Tools Required for Assembly (included): Allen Key
*If you are having difficulty, our friendly Customer Care team is always here to help. Please email [email protected]
STEP4:
STEP2: STEP3: STEP1:
PREPARATION
*Gradually tighten bolts in a star pattern: tighten one bolt and then the one opposite from it until all bolts are tightened.
Put the glass on the top.
Assemble the chair leg(B)and leg (C) to the chair(A),
using bolt and washer(HW1&HW2) and Allen key(HW3). Assemble the Seater leg(B) and leg(C) to the Seater(D), Assemble the table leg(E) to the table top(F),using bolt washer(HW1&HW2) and Allen key(HW3).
using bolt and washer(HW1&HW2) and Allen key(HW3).
C
C
B
B
HW3
HW1
HW2
A
B
B
C
C
D
HW3
HW1
HW2
E
E
E
EF
HW3
HW1
HW2