Safavieh Outdoor PAT6762 User manual

Part List and Hardware List
MODEL# PAT6762
Corner chair dimension: 26.97”W x 26.97”D x 26.77”H
Please make sure that you have all parts indicated before you
begin assembly of this item.
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when it is not in use.
Dust regularly with small brush or vacuum. Spills should be taken
care of immediately before they harden or stain with a slightly
dampened sponge.
PIECE DESCRIPTION PICTURE QUANTITY
NOTICE
Warning : Do not torque bolts / screws
Warning : Do not stand on the chair
Weight capacity : 300 lbs
Footrest dimension : 25.59”W x 25.59”D x 10.63”H
Table dimension : 26.77”W x 17.72”D x 26.77”H
2x 2x
1x 4x
1x 1x
1x 4x
1x
1x
1x
1x
1x
14x
4x
Right seat Foot leg
Table top
Table leg
Foot top
Leg chair
Right side
Left seat
Left back
Left side
Allen bolt
Allen screw
Right back
PIECE DESCRIPTION PICTURE QUANTITY
A
BJ
CK
DL
E
F
H1
H2
H3
H5
G
I
Extra bolt
Allen key
Wrench
H4
M6x70
M6x65
M6x50
1x

H1
H3
H4
H1
H3
H1
1
Step 2: attach the Left back (F) to the Left seat (E) as shown
2
on the picture.Using the Allen nut (H1) and tighten by the Allen
key (H4) and Extra bolt (H3) as shown on the picture .
A
E
AE
F
E
H1
H1
H1
H1
H1
H1
F
Step 1: attach the leg (A) to the Left seat (E) remove the nut and Flat
washer on the leg (A) as shown on the picture. Tighten the leg (A) by
using the Wrench (H5) as shown on the picture .
Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key and Wrench.
PREPARATION
H5
Hex
nut
Flat
washer

H1
H3
H4
H1
H3
H1
Step 3: attach the Left side (G) to the chair as shown on the picture. Using the Allen screw (H2) and Allen nut ( H1) to assembly
3
the Left side (G) to the seat (E) and back (B) as shown on the picture. Tighten by the allen key (H4) and Extra bolt (H3) .
H1
H2
B
G
E
D
H1
H2
H1
H1
G
H2

Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key and wrench.
4
PREPARATION
5
A
B
AB
C
B
H1
H1
H1
H1
H1
H1
C
Step 4: attach the leg (A) to the Right seat (B) remove the bolt and Flat
washer on the leg (A) as shown on the picture. Tighten the leg (A) by
using the Wrench (H5) as shown on the picture .
H5
H1
H3
H4
H1
H3
H1
Step 5: attach the Right back (C) to the Right seat (B) as shown
on the picture.Using the Allen nut (H1) and tighten by the Allen
key (H4) and Extra bolt (H3) as shown on the picture .

Step 6: attach the Right side (D) to the chair as shown on the picture. Using the Allen screw (H2) and Allen nut ( H1) to assembly
6
the Right side (D) to the Right seat (B) and back (B) as shown on the picture. Tighten by the allen key (H4) and extra bolt (H3) .
H1
D
B
H2
H1
H2
C
D
B
A
H2
H1
H3
H4
H1
H3
H1

7
H1
H1
H1
H1
J
J
I
H1
H1
H1
H1
H1
H1
J
I
Step 7: attach the Foot legs (J) to the Foot top (I) by using the Allen nut (H1) and tighten it by using the Allen key
(H4) and the extra bolt (H3) as shown on the picture.
Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key and wrench.
PREPARATION
H1
H3
H4
H1
H3
H1

89
Step 8: attach 4 legs (L) to the Table top (K) as shown on the
picture by remove nut and washer from the leg.
Step 9: Use the wrench (H5) to tighten all 4 legs as shown on
the picture.
KL
K
L
L
L
L
H5
L
K
K
L
L
L
L
H5
Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key and wrench.
PREPARATION