Safavieh BCH6400 User manual

Product Dimensions: 33-3/4"W*17-1/2D*20-5/8"H.
Model# BCH6400
* Do not tighten bolts until completely assembled.
CARE AND MAINTENCE
Wipe clean with a soft, dry cloth. The seat board can be cleaned with a mild
cleaner. Test the cleaning method on a hidden area before using them over the
entire area.
NOTICE
* This item may require periodic tightening.
Part List and Hardware List
Piece Description Picture Quantity
ALEFT PANEL 1 X
* This item should be assembled on a soft surface to prevent scratching the
finished product during assembly.
* Please make sure that you have all parts indicated before you begin assembly
of this item.
BRIGHT PANEL 1 X
CBACK PANEL 1 X
DBOTTOM BOARD 1 X
ETRESTLE 1 X
FSLIDING SHELF 2 X
GCUSHION
H1 ALLEN BOLT Ø1/4''*1-3/4'' 14 X
H2 ALLEN KEY 4mm 1 X
1 X
Weight Capacity : 550 lbs on top of the product
Warning : Do not stand on the product
Warning : Do not over torque bolts
WARNING

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time:15 minutes.
Tools Required for Assembly (included):Allen key.
Step 1:
Attach left panel (A) and right
panel (B) to the back panel (C),
Use Allen Key (H2) to lock
6*Allen bolts (H1), as picture.
1
H1
H2
H2
H1
H1
H2
H1 H2
H1
H2
H2
H1
H2
H1
H1
H2
A
B
C
2 3 4
Step 2:
Attach bottom board (D) and
trestle (E) in the corresponding
position on the assembled wood
frame (as step 1), Use Allen Key
(H2) to lock 8*Allen bolts (H1), as
picture.
E
D
Step 3:
Insert the two sliding shelves (F)
into the metal glide rails
respectively, then pushed back to
the bench, as picture.
F
G
Step 4:
Put the cushion (G) on the
assembled bench and the
assembly is completed.