Safavieh AMH8511 User manual

PRODUCT DIMENSION: 20" W x 17" D x 36.5" H
PIECE DESCRIPTION QUANTITY Weight Capacity: 225LBS
A BACK REST 1X
BLONG LEGS WITH WHITE BOLT
COVER (RED MARK) 2X
C
SHORT LEGS WITH BLACK BOLT
COVER
2X
NOTICE
* Please make sure that you have all parts indicated and they are in good condition before you begin assembly of
this item. Refer to part list and hardware list below for guidance.
* This item should be assembled on a soft surface to prevent scratching the finish during assembly.
* This item may require periodic tightening.
* If you are having difficulty, our friendly Customer Care team is always here to help. Please email
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list
and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): None
CAREANDMAINTENANCE
Adhesive felt pads should always be applied to areas of furniture which make direct contact with flooring, said
application will prevent damage to the furniture and or surfaces on which the furniture lies. Objects placed on
articles of furniture should rest on non abrasive material as to prevent damage to the wood finish. Objects whose
composition consist of plastic and rubber are known to discolor and damage the wood surfaces on which they
rest. Wipe up spills immediately and avoid common hazards such as hot dishes, harsh solvents and abrasives.
Cleaning should be done with a soft lint free cotton cloth dampened with water or furniture polish. On highly
used surfaces we recommend applying a quality paste wax which should be used on a regular basis to provide
additional protection from scratches and spills. How often you apply the wax depends on how much the furniture
wears.
PICTURE
PartListandHardwareList
WARNING: DO NOT STAND ON CHAIR
WARNING: DO NOT ROCK BACK AND FORTH OR
SIDE TO SIDE ON CHAIR

STEP3: Remove Black Bolt Cover. Screw Short Right Leg (C
）
into the back of the chair
PREPARATION
* Before beginning assembly of product, make sure all parts are present. Compare parts with part contents list and hardware contents list.
* If any part is missing or damaged, do not attempt to assemble the product.
* Estimated Assembly Time: 10 minutes.
* Tools Required for Assembly (included): None
* If you are having difficulty, our friendly Customer Care team is always here to help.
STEP1:Flip Back Rest (A) upside down. Remove White Bolt
Cover. Screw Long Right Leg (B) (REDMark) into the front of
the chair marked with REDMARK
STEP2: Remove White Bolt Cover. Screw Long Left Leg (B) (REDMark)
into the front of the chair marked with REDMARK
STEP4:RemoveBlackBoltCover.Screw Short Left Leg (C ) into
the back of the chair
STEP5: Before use, please make sure legs are secured tightly before
sitting.
B. Long legs
A. BACK REST
Red Mark
B. Long legs
Red Mark
A. BACK REST A. BACK REST
C. Short Legs
C. Short Legs
A. BACK REST