Safavieh Jayla SFV4735B User manual

CARE AND MAINTENANCE
NOTICE
Weight Capacity: 275 lbs
WARNING: DO NOT STAND ON CHAIR
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
B
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
SAFAVIEH
C O U T U R E
ASeat 1X
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Dimensions:
SFV4735 26.57"*31.89"*32.48"
HW4 Allen Key
HW3 Socket Screws 6*1.05*30MM
HW2
HW1
1X
4X
4X
4X
1X
1X
1X
Split Lock Washer(M6)
Flat Washer(M6)
Air Bolt Pole
Dial
C
D
Chassis
The base and hardware are in the box under the chair.

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen key
STEP4 PUT THE CHAIR UPRIGHT AND MAKE
SURE THE BASE IS LEVEL, THEN FIRMLY TIGHTEN
BOLTS WITH ALLEN KEY WHILE THE CHAIR IS
UPRIGHT AS PICTURESD ABOVE
HW4 A
B
STEP3 INSERT THE BASE AND SCREW IN
THE SCREWS BUT DON'T TIGHTEN COMPLETELY.
HW2 HW1 HW3
STEP2 PUT WASHERS ON THE SOCKET SCREWS IN
THE ORDER SHOWN IN THE PICTURE.
C
D
C
B
D
C
B
AB
D
C
STEP1 THE BASE IS IN THE BOX UNDER THE
SEAT, OPEN TO TAKE THE LEG BASE AND
HARDWARE
The base and hardware are in the box under the chair.
STEP3 PUT THE AIR BOLT POLE INTO THE CHASSIS
HOLE,AND THEN PUSH. DON'T WORRY, IT WILL
CONNECT FIRMLY ONCE SOMEONE SITS AFTER
FINISHED.
STEP4 CONNECT THE DIAL TO THE AIR BOLT
POLE, THEN PUSH.