Safavieh NST9003A User manual

PIECE
QUANTITY
HW1 12X
1X
WASHER 16X8
A
B
HW2
HW3
12X
TOP PART
Leg
DESCRIPTION PICTURE
1X
4X
ALLEN BOLT CSK 16X6
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should undertake a complete overall
cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or staining.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of this item
* This item should be assembled on a soft surface to prevent scratching the finish during assembly
* This item may require periodic tightening
Part List and Hardware List
The legs and hardware are located under the drawer
Allen key 4 mm
Item# NST9003A
Product dimensions: 17.3"W* 13.8"D* 18.9"H
The levellor in the legs are adjustable and can be adjusted to level the product as per floor.
*

The legs and hardware are located under the drawer
STEP2 PUT THE WASHERS (H2) ON THE ALLEN BOLT (H1) IN THE ORDER SHOWN
IN THE PICTURE
STEP3 INSERT ALLEN BOLT WITH WASHER INTO THE
BOTTOM PANEL HOLE AS SHOWN AND TIGHTEN WITH
ALLEN KEY(H3).
STEP 4 PLACE THE MARBLE (C) GENTLY AS SHOWN.
STEP1 OPEN THE ZIPPER ON THE INSIDE OF THE DRAWER
AND TAKE OUT LEGS AND HARDWARE
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 15 minutes.
Tools Required for Assembly (included): Allen Key
A
DETAIL A
SCALE 1 : 5