Safeline ProLink User manual
www.safeline-group.com
06.2019 © 2019 SafeLine and all the SafeLine products and
accessories are copyrighted by law.
Manufactured in Tyresö, Sweden
Conguration & Monitoring
ProLink Manual
ProLink 2.02 EN
2ProLink 2.02 EN
Introduction
Introduction
General information 3
Installation
Remote programming 4
Certicate
Declaration of conformity 7
Content
3ProLink 2.02 EN
Introduction
This unit was built with state-of-the-art technology and to
generally recognised safety related technical standards currently app-
licable. These installation instructions are to be followed by all people
working with the unit, in both installation and maintenance.
It is extremely important that these installation instructions are made
available at all times to the relevant technicians, engineers or servicing
and maintenance personnel. The basis prerequisite for safe handling
and trouble free operation of this system is a sound knowledge of the
basic and special safety regulations concerning conveyor technology,
and elevators in particular. The unit may only be used for its intended
purpose. Note in particular that, no unauthorised changes or additions
may be made inside the unit or individual components.
Exclusion of liability
The manufacturer is not liable with respect to the buyer of this product
or to third parties for damage, loss, costs or work incurred as a result of
accidents, misuse of the product, incorrect installation or illegal chang-
es, repairs or additions. Claims under warranty are likewise excluded in
such cases. The technical data is the latest available. The manufacturer
accepts no liability arising from printing errors, mistakes or changes.
Declaration of conformity
Download ”The declaration of conformity” at our website:
www.safeline-group.com
Safety Precautions!
- Only trained professionals, who are authorised to work on the equip-
ment, should install and con gure this product.
- This quality product is dedicated for the lift industry. It has been
designed and manufactured to be used for its speci ed purpose only.
If it is to be used for any other purpose, SafeLine must be contacted in
advance.
- It should not be modi ed or altered in any way, and should only be
installed and con gured stric tly following the procedures described in
this manual.
- All applicable health and safety requirements and equipment
standards should be considered and strictly adhered to when installing
and con guring this product.
- After installation and con guration this product and the operation
of the equipment should be fully tested to ensure correct operation
before the equipment is returned to normal use.
Electrical and electronic products may contain materials, parts and
units that can be dangerous for the environment and human health.
Please inform yourself about the local rules and disposal collection
system for electrical and electronic products. The correct disposal of
your old product will help to prevent negative consequences for the
environment and human health.
General
information
4
SafeLinePro SafeLine
ProLink
SafeLine
SL6
ProLink 2.02 EN
Installation
Remote
conguration
Required software
• Download the latest SafeLine Pro
• V2.0 or later ProLink and target-unit rmware.
Required hardware
• Windows based computer
• SafeLine emergency telephone MX2 or 3000
- Powered
- Connected to PSTN-line
• Serial cable
Restrictions
• Firmware updates are not possible with ProLink.
• WAV-les can not be downloaded through ProLink.
• DTMF-monitor will not work with ProLink.
• Unit numbers can only be programmed with ProLink if the units
are connected in a daisy-chain (series-connection) )wiring.
• We strongly recommend that the unit used as a ProLink has a
PSTN-line for communication. We do not support connection
with GSM-line.
5ProLink 2.02 EN
Installation
Remote
conguration
Setup
1. Power the connected SafeLine telephone and verify that the
telephone line indication is present.
2. Connect the SafeLine to your computer with our programming cable.
3. Start up SafeLine Pro.
4. Go to the Settings tab.
5. Verify the correct serial port is set under the SL ProLink remote
connection.
9. Enter the telephone number of the unit you want to congure.
10. If multiple units are daisy-chain or parallel connected, enter the
unit number.
11. Enter password (default = “0000“)
12. You can switch the speaker off for keeping it silent in your
working area.
13. Click on “Connect”.
14. In the progress eld you can follow the remote programming
handlings of the connection. Errors will be displayed in this eld.
- Wrong password
- Line busy
- Connection failue (disturbance)
15. Start the conguration by clicking “Read”. This will download the
SafeLine’s settings to SafeLine Pro. This operation will take about 20
seconds. You can follow the progress in the white bar.
16. Make the congurations for the unit.
17. Press “Write” to nish the conguration.
6. Go to the tab of the SafeLine you want connect to.
7. Select ProLink as connection type.
8. Click on “Connect”. A pop-up screen will be shown.
6ProLink 2.02 EN
Installation
When connected you can remotely test a SafeLine.
Clicking on “Test” in the main window. From here you can toggle
the SafeLine’s outputs and display its current status.
Remote
conguration
Your partner in lift safety
Antennvägen 10, 13548 Tyresö, Sweden
+46 (0)8-447 79 32, www.safeline-group.com
EU Declaration of Conformity
Product: Communication devise for lift equipment
Type / model: PROLINK
Article no: *PROLINK
Manufacturer: SafeLine Sweden AB
Year: 2017
We herewith declare under our sole responsibility as manufacturer that the products referred to
above complies with the following EC Directives:
Directives
Electro Magnetic Compatibility: 2014/30/EU
Low Voltage: 2014/35/EU
RoHS 2: 2011/65/EU
Standards applied
EN 12015:2014 EMC: Emission, Electromagnetic compatibility
EN 12016:2013 EMC/Lifts: Immunity, Electromagnetic compatibility
EN 62368–1:2014/AC:2015 LVD: Information Technology Equipment
EN 50581:2012 RoHS: Technical doc. for assessment of restriction of RoHS.
Tyresö, 2017-04-07
Lars Gustafsson,
Technical Manager, R&D , SafeLine Group
www.safeline-group.com www.safeline-group.com
SafeLine Europe
Industrieterrein 1-8 · 3290 Diest · Belgium
Support: +32 (0)4 85 89 08 95
SafeLine Deutschland GmbH
Kurzgewannstraße 3 · D-68526 Ladenburg · Germany
SafeLine Norway
Solbråveien 49 · 1383 Asker · Norway
SafeLine Denmark
Erhvervsvej 19 · 2600 Glostrup · Denmark
SafeLine Headquarters
Antennvägen 10 · 135 48 Tyresö · Sweden
Support: +46 (0)8 448 73 90
SafeLine Group UK
Unit 47 · Acorn Industrial Park · Crayford ·
Kent · DA1 4AL · United Kingdom
SafeLine is a registered trademark of SafeLine
Sweden AB. All other trademarks, service marks,
registered trademarks, or registered service marks
are the property of their respective owners.
Table of contents
Other Safeline Controllers manuals
