SafeTrust 8845-200 User manual

8845-200 Quickstart Guide
Last Updated: November 2021

Contents
In the box
What you'll need
Installation
Configuration
Testing
Regulatory
Support
01
02
03
04
05
06
07
Safetrust Inc. | safetrust.com
[e-mail]

01
Safetrust Inc. | safetrust.com
[e-mail]
In the box

Safetrust Inc. | safetrust.com
[e-mail]
#6-32 x .375” Phillips
machine screws
For mounting wall bracket
#6-32 x .375” spanner
security screw
Option 1: Secures the top
and bottom casing together
#6-32 x .375” phillips
flat head screw
Option 2: Secures the top
and bottom casing together

02
Safetrust Inc. | safetrust.com
[e-mail]
What you'll need

A working internet connection
Cable, 5-12 conductor (Wiegand), 4 conductor Twisted Pair Over-All Shield and
UL approved, Belden3107A or equivalent (OSDP)
Linear DC power supply
Metal or plastic junction box
Drill with various bits for mounting hardware
Safetrust Inc. | safetrust.com
[e-mail]

03
Safetrust Inc. | safetrust.com
[e-mail]
Installation

Safetrust Inc. | safetrust.com
[e-mail]
For a wall mounted installation, locate the electrical box which will be recessed into
the wall. You will see a top and bottom metal flange with holes which is used to
secure the back plate to the wall. Using the Phillips machine screws provided (#6-
32 x .375”) screw the back plate against electrical box so that it's flush.

Safetrust Inc. | safetrust.com
[e-mail]
The next step is to connect the wires as per the wiring table above.
Ground
Wiegand Output D0
Wiegand Output D1
Buzzer Input
Tamper Out
Green LED Input
Relay Out
Relay In
RED LED Input
RS485 B
RS485 A
12 VDC
Black
White
Green
Yellow
Purple
Orange
Blue
Grey
Brown
Pink
Aqua
Red
Wire Colors

Safetrust Inc. | safetrust.com
[e-mail]
IOnce the back plate has been fitted and the wiring is complete, the top casing can
be inserted onto the bottom casing like shown above.

Safetrust Inc. | safetrust.com
[e-mail]
Complete the hardware installation by fixing the snake eye screws (security
screws) to the top and bottom casing (#6-32X5/16" SS).

04
Safetrust Inc. | safetrust.com
[e-mail]
Configuration

Safetrust Inc. | safetrust.com
[e-mail]
Open the Safetrust Wallet APP and select Manage Sensor tab. Make sure your
system admin has set you up with this role.

Safetrust Inc. | safetrust.com
[e-mail]
With the Admin Installer tab open from the App, bring the phone in range of the IoT
Sensor and once visible from the App, highlight and select “Configure”.

Safetrust Inc. | safetrust.com
[e-mail]
• Choose an Identity System.
• Specify the Type of access from the dropdown (eg. Door, Gate etc.)
• Assign a short Name and Description using alphanumeric characters.
• Choose an Output for the sensor (the default is set to Wiegand).

Safetrust Inc. | safetrust.com
[e-mail]
When the IoT Sensor information is saved successfully to Credential Manager and
assigned to the Identity System, the new description will appear in the Manage
Sensor tab with a unique serial number assigned.

05
Safetrust Inc. | safetrust.com
[e-mail]
Testing

Safetrust Inc. | safetrust.com
[e-mail]
Status LED
Solid red
Indicates idle mode
Flashing red
Powering up
Solid green
Success
Flashing green
Credential is read and
access is granted
LED Ring
Access with cards

Safetrust Inc. | safetrust.com
[e-mail]
Status LED
Solid red
Indicates idle mode
Flashing red
Powering up
Solid Blue
Success
Flashing Blue
Credential is read and
access is granted
LED Ring
Access with mobile

06
Safetrust Inc. | safetrust.com
[e-mail]
Regulatory
Information