Safety Vision OBSERVER 4112 HVR User manual

4112-HVR Streamax-MobileDigitalVideoRecorder
4112-HVR is developed from the brand new platform N9M, which is an advanced and
function-extensive Mobile Video Recorder specially designed for network high definition, analog
audio & video input and excellent extension. It uses high-speed processor and embedded operating
system, patented file system 4.0 to ensure the safety and integration of important data, combining
with H. 264 video compression / decompression technology, network technology and GPS locating
technology. It can realize AHD 1080P and 720P high definition, IP 1080P and 720P high definition,
WD1, WHD1, WCIF, D1, HD1, CIF video recording and vehicle driving information recording, as
well as wireless data upload. With center software it also achieves alarm linkage central monitoring,
remote management and playback analysis. It is powerful with modular design, flexible installation,
easy maintenance and high reliability.
Specification
Function Overview Preview, Recording, Playback, Network, Locating
OS Linux 3.0.8
System Control Mode CP4, Easy Check, Network (WIFI), Mouse
Input 8 channels AHD(1080P)+4 channelIPC (1080P)
Output 2 channels
Total Resource
PAL: 8*720P@25FPS (AHD) +4*1080P@30FPS (IPC)
Or 8*1080P@12FPS (AHD) +4*1080P@30FPS (IPC)
NTSC: 8*720P@30FPS (AHD)+4*1080P@30FPS (IPC)
Or 8*1080P@15FPS (AHD)+4*1080P@30FPS (IPC)
Video
Video Signal Standard Electrical level: 1Vpp Impedance: 75ΩNTSC/PAL Optional
Input 12 channels
Output 2 channels
Audio Audio Signal Standard Electrical level: 2Vpp Input impedance: 4.7kΩ
Display Split 1/4/9 Image display
OSD GPS information, alarm, temperature, acceleration, voltage, device information, software
version, MCU version, network status
Display
Operation Interface Semi-transparent GUI
Video: H.264
Video/Audio Compression Audio: ADPCM, G.711A, G.711U
Recording
Image Resolution PAL:
1080P, 720P, WD1(928X576), WHD1(928X288), WCIF(464X288), D1(704X576),
HD1(704x288), CIF(352x288);
NTSC:
MainFeatures
♦Supports 8 channels 1080P(AHD)+4 channels IPC (1080P)
♦Modular design for easy maintenance
♦Revolutionary anti-vibration technology for 360 degree
installation
♦Supports 2.5” 2TB hard disk storage and SD card for
mirror recording
♦Dual streams for local recording and wireless transmission
♦Internal GPS for location tracking
♦Internal WIFI 802.11N supported for all the regular video
files and alarm files download(optional)
♦Built-in inertia sensor
♦Built-in heater

1080P, 720P, WD1(928X480), WHD1(928X240), WCIF(464X240), D1(704x480),
HD1(704x240), CIF(352x240);
Digital:
1080P （1920 X1080）720P(1280X720)
Image Quality 8 Levels adjustable
Recording Mode Manual/schedule/Alarm(sensor trigger, speed, acceleration, video loss, temperature)
Pre-recording 0-60minutes
Post-recording 0-30 minutes
Mirror Recording Yes
Playback Channel 4 channels by local playback
Playback Search Mode Date/time, channel, event
WIFI 802.11b/g/n
Network Ethernet RJ45 x 1 (10/100 M/1000M)
Locating GPS Location tracking, speed detection and time sync
Storage Hard disk Supports 2.5" SATA HDD up to 2TB
Vibration Pass the MIL-STD-810 Test
Shock Pass the MIL-STD-810 Test
USB USB2.0 x 2
SD SD slot x 1
RS232 RS232 X 2
RS485 RS485 X 2
Sensor 8 inputs, 2 outputs
Serial G-sensor (Internal)
Speed 1 channel pulse speed detection
Interface Touch panel CP4 Optional
Interface
Intercommunication I MIC interface
Dimension (L × W ×
H)(mm) 302.7x229.0x108.3
physical characteristics
Weight(with HDD)(kg) 2.6
Operating Temperature -40℃~ +70℃(-40°F~158°F)
Environment Operating Relative
Humidity 8%-90%（No Condense）
Input DC8-36V, ACC
Output 5V@500mA, 12V@500mA
Max Power Consumption 105.3W
Power
Standby Power
Consumption ≈0W
Dimension (L × W × H)(mm)


FRONT PANEL

REAR PANEL

Serial
number Print Description
1 DC IN 8-36V Power Input
2 Amplifier Amplifier interface
3 Panel Control panel (CP4)
4 LAN Network interface
5 USB USB interface
6 Serial Serial interface
7 GPS GPS Antenna Interface
8 WIFI WIFI Antenna Interface
9 A/V A/V input 1~8, A/V output

FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions (1)this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation.
The distance from the human body is more than 20cm.