Safevieh Outdoor PAT6745 User manual

MODEL# PAT6745
Product Dimension: 82.68”W x 29.13”D x 28.74”H
Please make sure that you have all parts indicated before you
begin assembly of this item.
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when it is not in use.
Dust regularly with small brush or vacuum. Spills should be taken
care of immediately before they harden or stain with a slightly
dampened sponge.
NOTICE
Warning : Do not torque bolts / screws
Warning : Do not stand on the bench
Weight capacity : 425 lbs
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY
Back
Seat
Side
Right Leg
Left Leg
Joint bar
Allen bolt L
Allen bolt S
Allen screw
Allen bolt S
Allen bolt S
Wrench
Allen Key
M6x50
M6x50
M6x50
M6x80
M6x30
1x
1x
2x
2x
2x
2x
3x
3x
4x
4x
8x
1x
1x
A
B
C
D
E
G1
F
G2
G3
G5
G6
G4
G7

Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included): Allen Key and Wrench.
PREPARATION
G5
G5
B
G5
G5
G5
C
C
BD
D
B
G4 G4
G4G7
G4
G4
G3
G3 G4
G4
E
D
G4
E
C
E
C
G3
Step 1: attach the side (C) to the seat (B) both side as shown on
the picture. Then use the Allen bolt (G5) to tighten all sides
by using the Allen Key (G7). Make sure the Allen bolt (G5) come
inside the hole of the side back (C) as shown on the picture.
Step 2: attach the right leg (D) and left leg (E) to the joint bar (F) as shown
on the picture.Use the Allen screw (G3) to attach it together by using the Allen
Key (G7). Then put these legs to the seat (B), use the Allen bolt (G4) as
shown on the picture. Tighten all by using the Allen Key (G7) as shown on the
picture.
C
C

G1
G2
G6
G7
G2
G1
G1
G1
G2
G2
Step 3: attach the back (A) to the seat (B) as shown on the picture.
Then use the Allen bolt L (G1) and the Allen bolt S (G2) and tighten by
the Allen Key (G7) and wrench (G6) as shown on the picture. Make sure
put correct position to use the Allen bolt L(G1) and the Allen bolt S (G2)
as shown on the picture.
A
B
C
C
Step 4: Lift up the side (C) as shown the picture and put down to lock the
side on the seat (B) then can use this lounger same as this bench.