Safevieh Outdoor PAT6757 User manual

HW 1
HW 2
HW 3
Please make sure that you have all parts indicated before you
begin assembly of this item.
CARE AND MAINTENANCE
Store outdoor furniture indoors or cover well when it is not in use.
Dust regularly with small brush or vacuum. Spills should be taken
care of immediately before they harden or stain with a slightly
dampened sponge.
NOTICE
Warning: do not stand on chair / bench & table
Warning: do not over torque bolts/screws
Weight Capacity: 704 lbs per bench & 55 lbs per table
Part List and Hardware List
Allen key
Bolts
06x25mm
Flat Washers
016x1.0mm
32X
2X
32X
A
F
B
C
D
E
1X
6X
6X
4X
1X
1X
G2X
Table frame
Table legs
Rear legs
Front legs
Table glass
Bench frame
Chair frame
1
MODEL# PAT6757
Product dimension:
Bench: 51.8W x 27.6D x 28.4H (Inches)
Chair: 25W x 27.6D x 28.4H (Inches)
Table: 41W x 21D x 14.5H (Inches)
PIECE PICTURE DESCRIPTION QUANTITY

B
B
A
A
HW1
HW2
HW3
HW1
HW2
HW3
Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
T
Tighten 70%
ool required for assembly (included):Allen Key.
PREPARATION
3
12
G
2
Tighten 100%
Step 2: Fully tighten using Key (c)Step1:Attach wood leg (1 & 2) to front and back of the chair
respectively, using a & b. Loosen the bolt to balance the chair first

B
B
A
A
HW1
HW2
HW3
HW1
HW2
HW3
Before beginning the assembly of the product, make sure all parts are present.
Compare the parts with the package contents list and hardware contents list.
If any parts are missing or damaged, do not attempt to assemble the product.
Tool required for assembly (included):Allen Key.
PREPARATION
6
45
F
3
Tighten 70% Tighten 100%
Step 1: Attach wood leg (1 & 2) to front and back of the bench
respectively, using a & b. Loosen the bolt to balance the bench first
Step 2: Fully tighten using Key (c)

C
C
C
C
HW1
HW2
HW3
Step 2: Fully tighten using Key (c) after that put
the glass on top table
Step 1: Attach wood leg (3) to frame, using a & b. Loosen the bolt
to balance the table first
8
7
9
E
D
4
Step 3: Put all cushions on the chairs and bench