SAINT-GOBAIN SageGlass 300-1192-001 Dimensions

The Industrial Computer houses the SageGlass Controls System’s intelligence, SageGlass Maestro™. Maestro uses a
predictive algorithm that considers multiple, project-specific inputs, along with exterior sensor readings, for automated
tinting that consistently delivers occupant comfort and energy savings year round.
PRODUCT SHEET
INDUSTRIAL COMPUTER
sageglass.com/resources
POWER USB
Dimensions Power Requirements
Width Length Height Voltage Frequency Peak Power
196 mm 122mm 36mm 100-240 VAC 50 - 60 Hz 45W
PRODUCT DIMENSIONS
PRODUCT RATINGS
Part Number Plug
Type Used in countries, such as:
300-1192-001 B Canada, Japan, Mexico, United States
300-1192-002 C Bolivia
300-1192-003 D India
300-1192-004 E Belgium, Czech Republic, France, Poland
300-1192-005 F Germany, Netherlands, South Korea, Spain
300-1192-006 G Kuwait, Qatar, Saudi Arabia, Singapore, UAE, UK
300-1192-007 I Australia, China, New Zealand
300-1192-008 J Switzerland
300-1192-009 K Denmark
300-1192-010 L Italy
300-1192-011 N Brazil
PART NUMBERS

PACKAGE INCLUDES
1. Industrial Computer
2. Wall mounting kit
3. DIN Rail mounting kit
4. Power Adaptor with interchangeable plug
TOOLS AND MATERIALS REQUIRED
1. 0,25 cm drill bit
2. 1,9 cm hole saw or speed bore
3. #1 Phillips screwdriver (or drill with #1 Phillips bit)
ADDITIONAL SUPPORTING DOCUMENTATION
Refer to SageGlass Product Sheets as they are produced for more in-depth information regarding the control system
components. Reference sageglass.com/resources
SYSTEM REQUIREMENTS
The Industrial Computer communicates to the SageGlass Symphony™ Control System via Ethernet and receives power
via AC/DC power adaptor.
1. Do not open or modify the device. The device has been tested and complies with FCC and CE regulations.
Modification of the device will void these certifications.
2. Install the device securely. Be careful handling the device to prevent injury and do not drop.
3. Wall or ceiling mounting of the device requires a pair of mounting brackets. Use the brackets provided.
4. Use M3 x 0.5 mm Flat Head screws to attach mounting brackets to threaded holes on bottom of chassis.
5. Operational temperature must be between 0-40 °C, with a noncondensing relative humidity of 10-90%.
6. The device can be stored at temperatures between 0-60 °C.
7. Keep the device away from liquids and flammable materials.
8. Do not clean the device with liquids. The chassis can be cleaned with a cloth.
9. Allow at least 5 cm of space around all sides of the device for proper cooling. If device is mounted to a vertical
surface, then the heatsink fins should be oriented vertically. Alternative orientations may result in reduced
operational temperature range.
10. This device is intended for indoor operation only.
11. For commercial applications, use Ethernet cables, category CAT5e or above.
12. For residential applications, use shielded Ethernet cables, category CAT5e or above.
sageglass.com/resources

sageglass.com/resources
MOUNTING INSTALLATION
WALL MOUNTING
STEP 1:
Attach wall mount brackets to chassis.
STEP 2:
Mark and prep holes in surface for mounting.
For mounting screws:
a. If surface is wood, mark screw locations and drive screws directly into mounting surface.
b If surface is metal, drill pilot holes using 0,25 cm drill bit.
STEP 3:
Using the Phillips screwdriver or drill, tighten the four screws on the mounting bracket.
21 cm
4,1 cm
0, 5cm
0, 8 cm
7,6 cm
22,4 cm
sageglass.com
Customer Support: 1-877-724-3321
Part Number: 300-1183-001
POWER
INPUT ETH 1 ETH 2
21 cm
4,1 cm
0, 5cm
0, 8 cm
7,6 cm
22,4 cm
sageglass.com
Customer Support: 1-877-724-3321
Part Number: 300-1183-001
POWER
INPUT ETH 1 ETH 2
FIGURE 1: WALL MOUNTING HOLE PATTERN
FIGURE 2: WALL MOUNTING INSTALLATION

MOUNTING INSTALLATION
CONNECTING DATA & POWER CABLES
DIN RAIL MOUNTING
STEP 1:
Attach wall mount brackets to chassis.
STEP 2:
Attach DIN Rail Clips to mounting brackets using Phillips
screwdriver.
STEP 3:
Clip system to the DIN Rail.
STEP 1:
Connect Ethernet cables to the Industrial Computer.
a. Use ETH1 to connect SageGlass Symphony Controls.
b. Use ETH2 for connection to the SageGlass provided firewall.
STEP 2:
Connect Power Adaptor to Industrial Computer. The computer will turn on automatically once power is applied.
FIGURE 3: DIN RAIL INSTALLATION
sageglass.com
Customer Support: 1-877-724-3321
Part Number: 300-1183-001
POWER
INPUT
ETH1
FIGURE 4: CABLE CONNECTIONS
ETH2
© SAGE Electrochromics, Inc. All rights reserved.
SageGlass is a registered trademark of SAGE Electrochromics, Inc.
SCS-168.1 sageglass.com /[e-mail]
SageGlass® is the pioneer of the world’s smartest dynamic glass. Electronically
tintable SageGlass tints or clears automatically to optimize daylight levels while
preventing heat and glare without the need for blinds or shades. SageGlass delivers
superior comfort, enhances occupant well-being and saves energy. As part of
Saint-Gobain, SageGlass is backed by more than 350 years of building science
expertise that only the world leader in sustainable environments can provide.
For additional product and instructional information,
visit: sageglass.com/resources
Installations
Patents
WHY SAGEGLASS?
1,000+
Countries
27+
560+