Salsco Electric Greens Roller QC Product manual

“O” MANUALS; EGR_QC_0009074 _Manual PW_10.30.2017.doc 1

“O” MANUALS; EGR_QC_0009074 _Manual PW_10.30.2017.doc 2
TABLE OF CONTENTS
MODEL 0009074 –ELECTRIC GREENS ROLLER QC
TABLE OF CONTENTS………………..……………………………………………Page 2
STATEMENT OF FACT ………………………………………………….…………Page 3
MACHINE REGISTRATION ………………………..…………………..………….Page 4
SAFETY & OPERATING INSTRUCTIONS ……………………….……..…….….Page 5
SERVICE & MAINTENANCE INSTRUCTIONS …………………...………….…Page 6
PARTS DIAGRAMS …………………………………..……….…...…………Pages 7 – 23
WIRING DIAGRAMS …………………………………..…..……………….Pages 24 – 25
TORQUE CHART ………………………………………………………………….Page 26
CONTROLLER TROUBLESHOOTING GUIDE/MAINTENANCE…….….Pages 27 - 30
HOW TO INSTALL MOTOR & GEAR BOX………………..……………………Page 31
WARRANTY POLICY/PROCEDURE ………………………….………….……...Page 32
COPY OF WARRANTY CLAIM FORM…………………………………………...Page 33
COPY OF DEALER DELIVERY REPORT & WARRANTY CARD……………..Page 34
SERVICE SCHEDULE LOG ……………………………………..………………...Page 35
.
SALSCO, INC.
105 School House Rd., Cheshire, CT 06410
800-872-5726, 203-271-1682, 203-271-2596(Fax)
[email protected]m, www.salsco.com

“O” MANUALS; EGR_QC_0009074 _Manual PW_10.30.2017.doc 3
STATEMENT OF FACT
You have just purchased the highest quality, most dependable, Greens Roller, on the
market today. This unit has the ability to meet exact standards and perform for years
with minimum downtime. HOWEVER, it cannot read nor will it understand this
manual no matter how long you leave it on top of the machine.
It is your responsibility to read and understand this manual; it is also your
responsibility to be certain this information is passed along to anyone who is expected
to operate this equipment. Should you choose not to read, understand and pass along
the information provided you, please expect equipment failure and possible injuries to
persons around this equipment.
For the safety of the operator, it is imperative that this manual is carefully read and
understood.
Once you have read this manual, it is your responsibility to be sure that all new
operators read and understand this manual, especially all cautions stated.
As a manufacturer of equipment, we have a responsibility to design a safe piece of
equipment. NOTE: The important safeguards and instructions in this manual are not
meant to cover all possible conditions and situations that may occur. It must be
understood that common sense, caution, and care are factors, which cannot be built
into any product. These factors must be supplied by the person(s) caring for and
operating this equipment.
ONLY YOU CAN PREVENT ACCIDENTS!!

“O” MANUALS; EGR_QC_0009074 _Manual PW_10.30.2017.doc 4
MACHINE REGISTRATION
MANUFACTURED BY: SALSCO, INC.
105 School House Rd., Cheshire, CT 06410
800-872-5726, 203-271-1682, 203-271-2596 (Fax)
[email protected]m www.salsco.com
THIS MANUAL COVERS MODEL (s): 0009074 ELECTRIC GREENS ROLLER QC
This company reserves the right to discontinue, add improvements to, or change the design of any model or
product at any time without obligation to improve existing machines, either by changing the design or
adding new parts.
It has been and will continue to be the policy of SALSCO to update existing machines at its own discretion.
Whenever possible, new designs will be made in such a way that they can be "Retro Fit" if so desired.
Record in the space provided below the model and serial number of this unit. Please retain these numbers
for future reference.
No parts orders will be accepted WITHOUT MODEL NUMBERS OR PART NUMBERS. All part
numbers are listed in this manual.
___________________________________________ ______________________________
Serial Number Model Number
NOTE: Be sure to complete your warranty card. This will insure immediate processing of any warranty
claims.
READ AND UNDERSTAND THIS MANUAL BEFORE STARTING MACHINE

“O” MANUALS; EGR_QC_0009074 _Manual PW_10.30.2017.doc 5
SAETY INSTRUCTIONS
1. NEVER leave unit running while unattended.
2. NEVER park on a green for any reason.
3. NEVER go down steep hills sideways. ALWAYS approach hills straight on.
4. NEVER change your mind mid-way down a steep incline. Once you've started down a steep incline,
change direction only with the greatest of care and gentlest touch.
OPERATING INSTRUCTIONS
1. Check that the unit has been serviced.
2. Turn on/off switch to on position.
3. You should start unit from seated position. Just reach down to On/Off switch, and turn unit on. Keep
feet off pedals.
4. REMEMBER: RIGHT PEDAL TO GO RIGHT, LEFT PEDAL TO GO LEFT.
5. Once unit is running, push pedal down slowly. Unit will begin to move. Drive it out of trailer on to a
grassy area.
6. Speed is controlled by pressure on the pedal.
HINTS:
1. KEEP BOTH FEET ON PEDALS AT ALL TIMES. By keeping your heels planted and moving
your toes to change direction, you have smooth control - left to right.
2. If you roll the same direction as green was mowed, it's easy to follow the lines. This helps a new
operator do a fine job sooner.
3. To insure longer life to your unit, when changing direction do so smoothly.
4. REMEMBER TO TURN UNIT OFF BEFORE GETTING OFF.

“O” MANUALS; EGR_QC_0009074 _Manual PW_10.30.2017.doc 6
SERVICE & MAINTENANCE INSTRUCTIONS
1. Check all grease fittings as listed below on a WEEKLY basis, and grease as necessary. (Add
grease till grease leaks slightly from fitting.)
Bearings on roll housings - Quantity 4
Pivot bearing on main housing - Quantity 2
U-Joint on steering shaft - Quantity 1
2. After approximately 1 WEEK of use, and then every 2 WEEKS thereafter, check drive
chains - one on each side on roller drive motor. Pivot motor to tighten chain. NOTE: Check
and adjust the tension of both drive motor chains on a regular basis. If chains are not tight,
this could cause severe sprocket wear and possible breakage.
3. After approximately 1 WEEK of use, and then every 2 WEEKS thereafter, check chains
on steering. Adjust as needed.
4. Pivot for articulating steering should be tight, with no play, much the same as wheel bearings
on cars.
5. Keep unit clean. Should rust form on rolls, simply drive the unit on a rough area till rolls are
clean.
6. Battery Maintenance/Charging. SEE MATERIALS/MANUAL PROVIDED BY
TROJAN, ENCLOSED IN THE MANUAL PACKAGE YOU RECEIVED WITH THE
ROLLER.
SAFETY IS A PRIME CONCERN AT SALSCO AND THE SAFETY DECALS ON YOUR MACHINE
ARE A HIGHLY VISIBLE AND CONSTANT REMINDER TO ALL OPERATORS. REPLACEMENT
SAFETY DECALS MAY BE OBTAINED BY CALLING SALSCO @ 1-800-872-5726, OR THE
DEALER IN YOUR AREA.

“O” MANUALS; EGR_QC_0009074 _Manual PW_10.30.2017.doc 7

“O” MANUALS; EGR_QC_0009074 _Manual PW_10.30.2017.doc 8

“O” MANUALS; EGR_QC_0009074 _Manual PW_10.30.2017.doc 9

“O” MANUALS; EGR_QC_0009074 _Manual PW_10.30.2017.doc 10

“O” MANUALS; EGR_QC_0009074 _Manual PW_10.30.2017.doc 11

“O” MANUALS; EGR_QC_0009074 _Manual PW_10.30.2017.doc 12

“O” MANUALS; EGR_QC_0009074 _Manual PW_10.30.2017.doc 13
NOTE: THIS DRAWING PERTAINS TO UNITS WITH S/N 0383 AND UP.
FOR UNITS WITH S/N 0382 AND PREVIOUS, REFER TO THE MANUAL
WITH THE REVISION DATE OF 10/6/2010.

“O” MANUALS; EGR_QC_0009074 _Manual PW_10.30.2017.doc 14

“O” MANUALS; EGR_QC_0009074 _Manual PW_10.30.2017.doc 15

“O” MANUALS; EGR_QC_0009074 _Manual PW_10.30.2017.doc 16

“O” MANUALS; EGR_QC_0009074 _Manual PW_10.30.2017.doc 17

“O” MANUALS; EGR_QC_0009074 _Manual PW_10.30.2017.doc 18
r
Revised 4/23/2010

O:\Manuals\E.G.R. QC 0009074\EGR_QC_0009074 _Manual PW_10.30.2017.doc 19

O:\Manuals\E.G.R. QC 0009074\EGR_QC_0009074 _Manual PW_10.30.2017.doc 20