Salter Brecknell 325 User manual

Model 325
Quick Reference Guide
Introduction
Congratulations on the purchase of the Model 325 scale.
Please read this guide to become familiar with the operation
of this product. Save this guide for later reference.
WARNING: Do not exceed the capacity of the scale. Damage
can occur.
Basic Operation
1. Ensure the scale is on a hard, flat and level surface.
2. Clear the scale platform and press the ON/OFF key…
When 0.0 is displayed, the scale is ready for
weighing.
3. Place the item to be weighed on the scale…
The weight is displayed.
If the battery runs low, the LOW BATTERY annunciator will
appear in the lower portion of the display window. Replace the
9-volt battery as soon as possible.
Auto Power Off
The unit has a battery saving auto power off function. If there
is no scale activity in four minutes, the scale shuts off. Press
the ON/OFF key to turn the scale on.
Unit of Measure
You can choose to display weight as lb/oz or kg/g. Press the
UNIT key to toggle between the two units of measure.
Capacity
Capacity for the Model 325 is 25 lb x 0.1 oz

Tare Function
You can view the weight of an object in a container by using
the Tare function. Follow these steps:
1. Turn the scale on, wait for zero weight to be displayed
and place the container on the scale. Press the TARE
key to tare the weight off the scale…
0weight is displayed.
2. Place the item to be weighed in the container…
The net weight of the item is displayed.
3. Remove the item from the container…
0weight is displayed.
4. If you have more items to be weighed using the same
container, place the item in the container and repeat the
process.
5. Once you are finished, remove all items from the
scale…
A negative weight is displayed.
6. Press the TARE key to zero the scale.
WARNING: Be sure the total weight of the container and the
contents do not exceed the capacity of the scale.
Hold Function
If you have a large item that covers the display while on the
scale platform, you can use the Hold function to freeze the
weight on the display for 10 seconds after the item is removed.
1. Press the HOLD key, then place the item on the scale
platform.
2. Remove the item from the platform…
The weight will remain on the display for 10 seconds.
There is no way to erase the weight display before
the 10 seconds are up.
3. Press the TARE key or HOLD key to cancel the Hold
function.
AWT35-500031 01 SB Model 325_QUG.fm November 8, 2006