Samsung AR18NSPXBWKNEU User manual

AIR CONDITIONER CONTENTS
SPLIT-TYPE AIR CONDITIONER
OUTDOOR UNIT
MODEL CODE
INDOOR UNIT
AR18NSPXBWKNEU AR18NSPXBWKXEU
1. Precautions
2. Product Specifications
3. Alignment and Adjustments
4. Disassembly and Reassembly
5. ASSY CONTROL
6. Electrical Parts List
7. Wiring Diagram
8. PCB Diagram
9. Operating Instructions
10. Troubleshooting
11.Block Diagram
12. Reference Sheet
AR18NSPXBWKNEU
AR24NSPXBWKNEU
AR18NSWXBWKNEU
AR24NSWXBWKNEU
AR18NSWXCWKNEU
AR24NSWXCWKNEU
AR18NSPXBWKXEU
AR24NSPXBWKXEU
AR18NSWXBWKXEU
AR24NSWXBWKXEU
AR18NSWXCWKXEU
AR24NSWXCWKX-EU
AR24NSPXBWKNEU
AR18NSWXBWKNEU
AR24NSWXBWKNEU
AR18NSWXCWKNEU
AR24NSWXCWKNEU
AR24NSPXBWKXEU
AR18NSWXBWKXEU
AR24NSWXBWKXEU
AR18NSWXCWKXEU
AR24NSWXCWKXEU

Samsung Electronics 1
Contents
1. Precautions · · ·· ·· ·· · ·· ·· ·· ·· ·· · ·· ·· ·· ·· · ·· ·· ·· · ·· · ·· ·· ·· · ·· ·· ·· · ·· ·· ·· · ·· ·· ·· · ·· ·· · ·· ········ ··· · ··· ··· · ··· ··· ··· ··· ··· · 1-1
1-1 Installing the air conditioner ····················································································································· 1-1
1-2 Power supply and circuit breaker ············································································································ 1-1
1-3 During operation··········································································································································· 1-1
1-4 Disposing of the unit···································································································································· 1-2
1-5 Others································································································································································ 1-2
································································ 2-1
2-1 The Feature of Product································································································································ 2-1
2-3
3. Alignment and Adjustments········································································ 3-1
3-1 Test Mode························································································································································· 3-1
3-2 dohteMkcehCdnarorrEyalpsiD 3-2
3-3 Setting Option Setup Method ················································································································· 3-4
4. Disassembly and Reassembly······································································ 4-1
4-1. Indoor Unit ····················································································································································· 4-2
5. ASSY CONTROL ······························································································ 5-1
5-1 ASSY KIT CODE DB92-04409A 5-1
5-2
··················································································································
5-2
ASSY KIT CODE DB92-04378B··················································································································
6. Electrical Parts List ························································································ 6-1
6-1 INDOOR MAIN PCB CODE DB92-04101B······························································································ 6-1
6-2 OUTDOOR MAIN PCB CODE DB92-04029D·························································································· 6-4
7. Wiring Diagram······························································································ 7-1
7-1 Indoor Unit ······················································································································································ 7-1
7-2 Outdoor Unit··················································································································································· 7-4
6-3 INDOOR DISPLAY PBA CODE DB92-02877A
························································································ 6-7
············································································································
2-4
4-2. Outdoor Unit (Q)
····························································································································· 4-12

2 Samsung Electronics
Contents
8. PCB Diagram ·································································································· 8-1
9. Operating Instructions·················································································· 9-1
9-1 Name of Each Part ············································································································································ 9-1
9-2 Wireless Remote Control-Buttons and Display······················································································ 9-3
11. Block Diagram ····························································································· 11-1
11-1 Indoor unit························································································································································ 11-1
11-2 Outdoor unit ···················································································································································· 11-2
12. Reference Sheet··························································································· 12-1
12-1 Low Refrigerant Pressure Distribution ··································································································· 12-1
12-2 Pressure & Capacity mark···························································································································· 12-1
12-3 Q & A for Non-trouble ·································································································································· 12-2
12-4 Cleaning /Filter Change······························································································································· 12-5
12-5 Installation ························································································································································ 12-6
12-6 Installation Diagram of Indoor Unit and Outdoor Unit ··································································· 12-7
8-5 SUB PCB-Receive - DB92-02874A
··········································································································· ····
8-6 Wire connectiong the indoorunit terminal blocks ·············································································
12-7 Reference sheet ············································································································································ 12-9
10. Troubleshooting ··························································································10-1
10-1 Items to be checkedFirst······························································································································· 10-1
10-2 Communication Error····································································································································· 10-2
10-2-1 Communication Error ······························································································································· 10-2
10-2-2 Indoor temperature sensor Error
··································································································· ·································· 10-3
10-2-3 Indoor fan motor speed detecting error (BLDC fan) ······························ 10-4
10-2-4 Outdoor temperature sensor error
··································································································· ·································· 10-5
··························
10-2-5 Outdoor Cond temperature sensor error ··································································································· ·································· 10-6
10-2-6 Outdoor Discharge temperature sensor error ······························ 10-7
10-2-7 Operation condition secession error
··································································································· ·································· 10-8
···································································································
10-2-8 EEPROM error/OTP error ··································································································· ·································· 10-9
10-2-9 Outdoor Fan motor error
··································································································· ·································· 10-10
10-2-10 Compressor starting error ······························ 10-11
10-2-11 Compressor wire missing error/rotation error
··································································································· ·································· 10-12
···································································································
10-2-12 Current sensor error/Input current sensor error ··································································································· ·································· 10-13
10-2-13 O.C(Over Current) error
··································································································· ·································· 10-14
10-2-14 No power outdoor (Initial Diagnosis) (Not displayed) 10-16
···································································································
10-2-15 When the Up/Down, Left/Right, Grill louver motor does not operate (Initial Diagnosis)
(Not displayed) ······························ 10-17
10-2-16 When the remote control is not receiving 10-18
···································································································
···································································································
10-2-17 Smart Install error ··································································································· ·································· 10-19
8-1 INDOOR MAIN PCB CODE DB92-04101B······························································································ 8-1
8-2 INDOOR MAIN PCB CODE DB92-04029D····························································································· 8-2
8-4 INDOOR DISPLAY PBA CODE DB92-04106A
························································································
8-4
8-5
8-6
10-2-18 Outdoor OLP over temperature error (One way Inverter Only) ·················································· 10-20
8-3 INDOOR MAIN PCB CODE DB92-04025C····························································································· 8-3

Samsung Electronics 1-1
1. Precautions
1-1 Installing the air conditioner
O Uses should not install the air conditioner by themselves.
Ask the dealer or authorized company to install the air conditioner except window-type air conditioner in U.S.A and Canada.
O If you don't install the air conditioner properly, it may cause a fire, a water leakage or an electric shock.
O You must install the air conditioner according to the national wiring regulations and safety regulations.
O
Install the indoor unit higher than 2.5m from the floor to avoid the injury caused by the operation of the fan.
(except the window-type air conditioner)
O The manufacturer is not responsible for any accidents or injury caused by an incorrect installation.
O When installing the built-in type air conditioner, keep all electric cables such as the power cable and the connection cord in
pipes, ducts, or cable channels to protect them from the danger of impact or any other incidents.
1-2 Power supply and circuit breaker
O If the power cord of the air conditioner is damaged, it must be replaced by the manufacturer or a qualified person in order
to avoid a hazard.
O The air conditioner must be plugged into an independent circuit if applicable or connect the power cable to the auxiliary circuit
breaker.
An all pole disconnection form the power supply must be incorporated in the fixed wiring with a contact opening of>3mm.
O Do not extend an electric cord to the air conditioner.
O The air conditioner must be plugged in after you complete the installation.
1-3 During operation
ODo not repair the air conditioner at your discretion.
It is recommended to contact a service center directly.
ONever spill any kind of liquid on the air conditioner.
If this happens, turn off the air conditioner and contact an authorized service center.
O Do not insert anything between the airflow blades to prevent damage of the inner fan and consequent injury.
Keep children away from the air conditioner.
O Do not place any obstacles in front of the air conditioner.
ODo not spray any kind of liquid into the indoor unit. If this happens, turn off the air conditioner and contact a service center.
OMake sure that the air conditioner is well ventilated at all times.
Do not place a cloth or other materials over it.
O Remove the batteries if you don't use the remote control for a long time. (If applicable)
O Use the remote control within 7 meters from the indoor unit. (If applicable)

1-2 Samsung Electronics
1-4 Disposing of the unit
OBefore the throwing out the air conditioner, remove the batteries from the remote control.
OWhen you dispose of the air conditioner, consult your dealer. If pipes are removed incorrectly, refrigerant may blow out
and cause air pollution. When it contacts with your skin, it can cause skin injury.
OThe package of the air conditioner should be recycled or disposed of properly for environmental reasons.
1-5 Others
ONever store or load the air conditioner upside down or sideways to prevent the damage to the compressor.
OYoung children or infirm persons should be always supervised when they use the air conditioner.
OMax current is measured according to IEC standard for safety.
OCurrent is measured according to ISO standard for energy efficiency.

Samsung Electronics 2-1
2-step cooling
2-step cooling function will quickly cool the room to reach the desired temperature and then it
will adjust the fan speed and ai ow direction automatically to help you stay comfortable and
refreshed.
Fast cooling
If you want the strong and cool air, just select Fast function! It will get you the strongest air!
Comfort cooling
If you want the comfortable and refreshing air, Comfort function will spread the cool air indirectly to
you, so that you can stay comfortable.
Single User
Use the Single User function when you’re along at home. Aside from energy savings from the
inverter technology, the Single User Mode will further minimize your energy consumption and
reduce your electricity bill by adjusting the maximumoperating capacity of the compressor.
Easy Filter
Smart Install
When the installation is done, your product will examine itself through trial operation to check if it
was installed properly.
Easy Installation
It’s so easy to install! You can easily hang the product on the wall and connect the pipes and wires
by opening the cover on the bottom of the product. Now you won’t have to tilt the product to
connect the pipe and the wires!
function
function will allow you to have deep, goodnight’s sleep by adjusting the
2. Product Specications
2-1 The Feature of Product

2-2 Samsung Electronics
AR18NSPXBWK/EU AR24NSPXBWK/EU AR18NSWXBWK/EU
Rating Mode Unit Wall-mounted Wall-mounted Wall-mounted
T1 Cool Btu/h
5000 6500 5000
T3 Cool Btu/h
- - -
Heat Btu/h
6000 7400 6000
T1 Cool W
1450 2280 1450
T3 Cool W
- - -
Heat W
1750 2595 1750
T1 Cool A
6.6 10.2 6.6
T3 Cool A
- - -
Heat -
7.9 11.5 7.9
EER W/W
3.45 2.85 3.45
- - -
COP W/W
3.43 2.85 3.43
l/hr.
0.8 0.8 0.8
IDU -
F-RAC-11 F-RAC-11 F-RAC-11
ODU -
Q-480 Q-480 Q-480
Main -
Φ7, 2R*10S*840mm, H1.3,
N.G.S, 5by5
Φ7, 2R*10S*840mm, H1.3,
N.G.S, 5by5
Φ7, 2R*10S*840mm, H1.3,
N.G.S, 5by5
Sub -
Φ7, 2R*5(6)S*840mm,
H1.3, N.G.S : (F05-2-1)
Φ7, 2R*5(6)S*840mm,
H1.3, N.G.S : (F05-2-2)
Φ7, 2R*5(6)S*840mm,
H1.3, N.G.S : (F05-2-1)
Main -
Φ7W, 2R*28S*906.8mm,
Corrugate1.5, N.G.S,
Φ7W, 2R*28S*906.8mm,
Corrugate1.5, N.G.S,
Φ7W, 2R*28S*906.8mm,
Corrugate1.5, N.G.S,
Sub -
- - -
Model -
UG9TK3150FE4 UG9TK2150FE4 UG9TK3150FE4
OLP -
- - -
Code -
DB31-00636A DB31-00637A DB31-00636A
Name -
- - -
Code -
DB31-00642D DB31-00658D DB31-00642D
Name -
- - -
Expansion Φ* L - EEV Φ1.65 EEV Φ1.65 EEV Φ1.65
type -
R-410A R-410A R-410A
charge g
1300 g 1450 g 1300 g
SVC Valve Liquid / Gas - 6.35/12.7 6.35/15.88 6.35/12.7
Tube Dis. / Suc. - 9.52/12.7 9.52/12.7 9.52/12.7
Drain hose D * L mm 20*550 20*550 20*550
-
- - -
-
- - -
V/Hz/Φ
220-240/50/1 220-240/50/1 220-240/50/1
-
T1 T1 T1
IDU UT,T dB 46 51 46
ODU dB 57 60 57
IDU
1065*311*301 1065*311*301 1065*311*301
ODU
880*310*648 880*310*648 880*310*648
IDU
13 13 10.1
ODU
40.8 40.8 31.8
IDU
16 ˚C~32 ˚C 16 ˚C~32 ˚C 16 ˚C~32 ˚C
ODU
-10 °C to 46 °C -10 °C to 46 °C -10 °C to 46 °C
IDU
27 °C or less 27 °C or less 27 °C or less
ODU
-15 °C to 24 °C -15 °C to 24 °C -15 °C to 24 °C
Model
Capacity
Power Input
Current
Efficiency
Climate Class
Net Size (W*D*H)
Weight
Dehumidifying
Platform
Evap
Cond
Comp
Motor In
Motor Out
Power Cord
4-WAY V/V
Refrigerant
Power Supply
Noise
Cooling
Heating
Operation range
mm
kg

2-3 Samsung Electronics
AR24NSWXBWK/EU AR18NSWXCWK/EU AR24NSWXCWK/EU
Rating Mode Unit Wall-mounted Wall-mounted Wall-mounted
T1 Cool Btu/h
6500 5000 6500
T3 Cool Btu/h
- - -
Heat Btu/h
7400 6000 7400
T1 Cool W
2280 1450 2280
T3 Cool W
- - -
Heat W
2595 1750 2595
T1 Cool A
10.2 6.6 10.2
T3 Cool A
- - -
Heat -
11.5 7.9 11.5
EER W/W
2.85 3.45 2.85
- - -
COP W/W
2.85 3.43 2.85
l/hr.
0.8 0.8 0.8
IDU -
F-RAC-11 F-RAC-11 F-RAC-11
ODU -
Q-480 Q-480 Q-480
Main -
Φ7, 2R*10S*840mm, H1.3,
N.G.S, 5by5
Φ7, 2R*10S*840mm, H1.3,
N.G.S, 5by5
Φ7, 2R*10S*840mm, H1.3,
N.G.S, 5by5
Sub -
Φ7, 2R*5(6)S*840mm,
H1.3, N.G.S : (F05-2-2)
Φ7, 2R*5(6)S*840mm,
H1.3, N.G.S : (F05-2-1)
Φ7, 2R*5(6)S*840mm,
H1.3, N.G.S : (F05-2-2)
Main -
Φ7W, 2R*28S*906.8mm,
Corrugate1.5, N.G.S,
Φ7W, 2R*28S*906.8mm,
Corrugate1.5, N.G.S,
Φ7W, 2R*28S*906.8mm,
Corrugate1.5, N.G.S,
Sub -
- - -
Model -
UG9TK2150FE4 UG9TK3150FE4 UG9TK2150FE4
OLP -
- - -
Code -
DB31-00637A DB31-00636A DB31-00637A
Name -
- - -
Code -
DB31-00658D DB31-00642D DB31-00658D
Name -
- - -
Expansion Φ* L - EEV Φ1.65 EEV Φ1.65 EEV Φ1.65
type -
R-410A R-410A R-410A
charge g
1450 g 1300 g 1450 g
SVC Valve Liquid / Gas - 6.35/15.88 6.35/12.7 6.35/15.88
Tube Dis. / Suc. - 9.52/12.7 9.52/12.7 9.52/12.7
Drain hose D * L mm 20*550 20*550 20*550
-
- - -
-
- - -
V/Hz/Φ
220-240/50/1 220-240/50/1 220-240/50/1
-
T1 T1 T1
IDU UT,T dB 51 46 51
ODU dB 60 57 60
IDU
1065*311*301 1065*311*301 1065*311*301
ODU
880*310*648 880*310*648 880*310*648
IDU
13.4 13.4 13.4
ODU
44.8 44.8 44.8
IDU
16 ˚C~32 ˚C 16 ˚C~32 ˚C 16 ˚C~32 ˚C
ODU
-10 °C to 46 °C -10 °C to 46 °C -10 °C to 46 °C
IDU
27 °C or less 27 °C or less 27 °C or less
ODU
-15 °C to 24 °C -15 °C to 24 °C -15 °C to 24 °C
Cooling
Heating
Operation range
mm
kg
Climate Class
Net Size (W*D*H)
Weight
Dehumidifying
Platform
Evap
Cond
Comp
Motor In
Motor Out
Power Cord
4-WAY V/V
Refrigerant
Power Supply
Noise
Model
Capacity
Power Input
Current
Efficiency

2-3 Samsung Electronics
2-3 The Com
AR18NSPXBWK/EU AR24NSPXBWK/EU AR18NSWXBWK/EU
Indoor Unit
Outdoor Unit
Indoor Unit 13.4 13.4 13.4
Outdoor Unit 40.8 44.8 44.8
Indoor Unit 1065*311*301 1065*311*301 1065*311*301
Outdoor Unit 880*310*648 880*310*648 880*310*648
Indoor Unit 46 51 46
Outdoor Unit 57 60 57
EASY CLEAN FILTER EASY CLEAN FILTER EASY CLEAN FILTER
88 SEG 88 SEG 88 SEG
Indoor Display
Net Weight
Net Dimension
Noise
Model
Design
Air Purifying System
DEVELOPMENT MODEL
AR24NSWXBWK/EU AR18NSWXCWK/EU AR24NSWXCWK/EU
Indoor Unit
Outdoor Unit
Indoor Unit 13.4 13.4 13.4
Outdoor Unit 44.8 44.8 44.8
Indoor Unit 1065*311*301 1065*311*301 1065*311*301
Outdoor Unit 880*310*648 880*310*648 880*310*648
Indoor Unit 51 46 51
Outdoor Unit 60 57 60
EASY CLEAN FILTER EASY CLEAN FILTER EASY CLEAN FILTER
88 SEG 88 SEG 88 SEG
Indoor Display
Net Weight
Net Dimension
Noise
Model
Design
Air Purifying System
DEVELOPMENT MODEL

2-4 Samsung Electronics
Item Descriptions Code No. Q’ty Remark
ASSY HANGER DB90-07731A 1
Indoor Unit
ASSY WIRELESS REMOCON
DB93-16761C 1
HOLDER REMOCON DB61-06087A 1
BATTERY 4301-000121 2
MANUAL USERS DB68-07469A 1
MANUAL INSTALL DB68-06732A 1
SCREW-TAPPING 6002-000623 2
CAP-SCREW DB67-01404B 2
Rubber Leg DB67-01533A 4 Outdoor unit case

Samsung Electronics 3-1
3. Alignment and Adjustments
3-1 Test Mode
Q How to Approach Test Mode
You can approach the test mode by pressing the on/off switch of
indoor unit for 5 seconds.
Q Test mode operation option
After installing the air conditioner, check whether each subordinate is normally operated or not by operating the test mode.
●
When an Error occurs, display the Error Mode.
●
Operation Mode : Cool mode. operate the cool mode by operating the compressor by force without the compressor ON/OFF
according to the set temperature/indoor temperature. (Do not follow the antifreeze control)
●
Up-down louver : Up-down swing mode
●
Indoor Fan : Turbo
●
Because the teat mode operate the cool mode by force not related to the set temperature / indoor
temperature, check whether each subordinate is operated normally or not after completing installation
and must turn off the power of the air conditioner.
Note

3-2 Samsung Electronics
3-2 Display Error and Check Method
3-2-1 Indoor Display Error and Check Mathod
E203
E422/E554
E458
E461
E464
E465
E500
Time out comm. (Inv Micom <-> Main Micom)
EEV or Valve Close error-Self diagnosis
/Gas Leak Error
Out door and Fan Error
Comp. Starting Error
IPM Over Current (O.C) Error
Comp V_Iimit/I_limit Error
Heatsink overheat or IPM overheat
<->
*Note*
If the set doesn’t work (No power), check the thermal fuse of terminal block OPEN or
SHORT with Multimeter.
* Measure the thermal fuse housing PIN#1~2 :
OPEN(disconnection)-> defective product
E463
No display about the outdoor condition

Samsung Electronics 3-3
3-2-2 Outdoor LED Display Error and Check method
Outdoor OLP over temperature error

Samsung Electronics 3-4
3-3 Setting Option Setup Method
Step 2
Enter the Options Setup mode and select your options asscording to the following procedure.
Ex) Option No. :
Step 1
Enter the Option Setup mode.
1. Tack out the batteries of remote control.
2. Press the temperature button simultaneously and insert the battery again.
3. Make sure the remote control display shown as
Setting option SEG1
Press the button the display panel to .
Press the button repeatedly to select .
⋯
Press the button to set Cool mode.
5
4
3
2
1
Method Display
Setting option SEG2
Press the button the display panel to .
Press the button repeatedly to select .
⋯
Setting option SEG3
Press the button the display panel to .
Press the button repeatedly to select .
⋯
Setting option SEG4
Press the button the display panel to .
Press the button repeatedly to select .
⋯

3-5 Samsung Electronics
6
7
8
9
10
11
12
13
14
MethodDisplay
Press the button to set Dry mode.
Setting option SEG5
Press the button the display panel to .
Press the button repeatedly to select .
⋯
Setting option SEG6
Press the button the display panel to .
Press the button repeatedly to select .
⋯
Setting option SEG7
Press the button the display panel to .
Press the button repeatedly to select .
⋯
Setting option SEG8
Press the button the display panel to .
Press the button repeatedly to select .
⋯
Setting option SEG9
Press the button the display panel to .
Press the button repeatedly to select .
⋯
Setting option SEG10
Press the button the display panel to .
Press the button repeatedly to select .
⋯
Press the button to set Fan mode.
Press the button to set Heat mode.

Samsung Electronics 3-6
15
16
17
18
19
20
21
22
23
Method Display
Setting option SEG16
Press the button the display panel to .
Press the button repeatedly to select .
⋯
Setting option SEG15
Press the button the display panel to .
Press the button repeatedly to select .
⋯
Setting option SEG14
Press the button the display panel to .
Press the button repeatedly to select .
⋯
Setting option SEG13
Press the button the display panel to .
Press the button repeatedly to select .
⋯
Setting option SEG11
Press the button the display panel to .
Press the button repeatedly to select .
⋯
Setting option SEG12
Press the button the display panel to .
Press the button repeatedly to select .
⋯
Press the button to set Auto mode.
Press the button to set Cool mode.
Press the button to set Dry mode.

3-7 Samsung Electronics
24
25
26
27
28
29
설정방 법 표시 부
Press the button to set Fan mode.
Press the button to set Heat mode.
Setting option SEG17
Press the button the display panel to .
Press the button repeatedly to select .
⋯
Setting option SEG18
Press the button the display panel to .
Press the button repeatedly to select .
⋯
Setting option SEG19
Press the button the display panel to .
Press the button repeatedly to select .
⋯
Setting option SEG20
Press the button the display panel to .
Press the button repeatedly to select .
⋯

Step 3 After setting, check whether the setting is correct.
Press the button and check whether the setting is correct per each mode.
Step 4 Press the ( ) button
Check whether operation lamp flashes with beep sound Setting option is completed.
Step 5
Remove the batteries in remote control and insert the batteries again. Press power button to operate.
■ Error mode
1. When Operation lamp flashes, plug the power plug again and press power button to run.
2. Check whether you set correct option code per model when air-conditioner does not run or operation lamp flashes.
Proceed Step 2~4 to setting option 2 and option 3.
3-8 Samsung Electronics
Option code :
Model Option code
AR18NSPXBWK/EU 011C45-15EA1C-27323C-3727C4
AR24NSPXBWK/EU 011C45-16EA4A-27414A-3714C4
AR18NSWXBWK/EU 011C45-15E21C-27323C-3727C4
AR24NSWXBWK/EU 011C45-16E24A-27414A-3714C4
AR18NSWXCWK/EU 011C45-15E21C-27323C-3727C4
AR24NSWXCWK/EU 011C45-16E24A-27414A-3714C4

Samsung Electronics4-1
4. Disassembly and Reassembly
Necessary Tools
krameRmetI
+SCREW DRIVER
MONKEY SPANNER
- SCREW DRIVER
Q’ty 1 ea.
To assembly and disassembly the screw
Q’ty 1 ea.
To assembly and disassembly the Fan motor and Compressor
Q’ty 1 ea.
To assembly and disassembly the screw


SAMSUNG ELECTRONICS
4-1. Indoor Unit
No. Parts Procedure Remark
1 PANEL-FRONT 1) Stop the driving of air conditioner and
shut off main power supply.
2) Detach FILTER PRE from the PANEL
FRONT.
3) Cover Panel is assembled on bottom
of indoorunit as shown in the gure.
Remove the Cap Screw as shown on the
right side and then remove the screw
and separate the Cover Panel.
4) Cover Panel is xed to body by Hook
in center area and side area.
Side area
F03,F04
F05
Center area
Side area
HOOK